1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Phy drivers for Qualcomm and Atheros platforms
4#
5config PHY_ATH79_USB
6	tristate "Atheros AR71XX/9XXX USB PHY driver"
7	depends on OF && (ATH79 || COMPILE_TEST)
8	default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM
9	select RESET_CONTROLLER
10	select GENERIC_PHY
11	help
12	  Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs.
13
14config PHY_QCOM_APQ8064_SATA
15	tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
16	depends on ARCH_QCOM
17	depends on HAS_IOMEM
18	depends on OF
19	select GENERIC_PHY
20
21config PHY_QCOM_IPQ4019_USB
22	tristate "Qualcomm IPQ4019 USB PHY driver"
23	depends on OF && (ARCH_QCOM || COMPILE_TEST)
24	select GENERIC_PHY
25	help
26	  Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
27
28config PHY_QCOM_IPQ806X_SATA
29	tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
30	depends on ARCH_QCOM
31	depends on HAS_IOMEM
32	depends on OF
33	select GENERIC_PHY
34
35config PHY_QCOM_PCIE2
36	tristate "Qualcomm PCIe Gen2 PHY Driver"
37	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
38	select GENERIC_PHY
39	help
40	  Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
41	  based PCIe controller.
42
43config PHY_QCOM_QMP
44	tristate "Qualcomm QMP PHY Driver"
45	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
46	select GENERIC_PHY
47	help
48	  Enable this to support the QMP PHY transceiver that is used
49	  with controllers such as PCIe, UFS, and USB on Qualcomm chips.
50
51config PHY_QCOM_QUSB2
52	tristate "Qualcomm QUSB2 PHY Driver"
53	depends on OF && (ARCH_QCOM || COMPILE_TEST)
54	depends on NVMEM || !NVMEM
55	select GENERIC_PHY
56	help
57	  Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
58	  controllers on Qualcomm chips. This driver supports the high-speed
59	  PHY which is usually paired with either the ChipIdea or Synopsys DWC3
60	  USB IPs on MSM SOCs.
61
62config PHY_QCOM_USB_HS
63	tristate "Qualcomm USB HS PHY module"
64	depends on USB_ULPI_BUS
65	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
66	select GENERIC_PHY
67	help
68	  Support for the USB high-speed ULPI compliant phy on Qualcomm
69	  chipsets.
70
71config PHY_QCOM_USB_SNPS_FEMTO_V2
72	tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
73	depends on OF && (ARCH_QCOM || COMPILE_TEST)
74	select GENERIC_PHY
75	help
76	  Enable support for the USB high-speed SNPS Femto phy on Qualcomm
77	  chipsets.  This PHY has differences in the register map compared
78	  to the V1 variants.  The PHY is paired with a Synopsys DWC3 USB
79	  controller on Qualcomm SOCs.
80
81config PHY_QCOM_USB_HSIC
82	tristate "Qualcomm USB HSIC ULPI PHY module"
83	depends on USB_ULPI_BUS
84	select GENERIC_PHY
85	help
86	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
87
88config PHY_QCOM_USB_HS_28NM
89	tristate "Qualcomm 28nm High-Speed PHY"
90	depends on OF && (ARCH_QCOM || COMPILE_TEST)
91	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
92	select GENERIC_PHY
93	help
94	  Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
95	  High-Speed PHY driver. This driver supports the Hi-Speed PHY which
96	  is usually paired with either the ChipIdea or Synopsys DWC3 USB
97	  IPs on MSM SOCs.
98
99config PHY_QCOM_USB_SS
100	tristate "Qualcomm USB Super-Speed PHY driver"
101	depends on OF && (ARCH_QCOM || COMPILE_TEST)
102	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
103	select GENERIC_PHY
104	help
105	  Enable this to support the Super-Speed USB transceiver on various
106	  Qualcomm chipsets.
107
108config PHY_QCOM_IPQ806X_USB
109	tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
110	depends on HAS_IOMEM
111	depends on OF && (ARCH_QCOM || COMPILE_TEST)
112	select GENERIC_PHY
113	help
114	  This option enables support for the Synopsis PHYs present inside the
115	  Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
116	  both HS and SS PHY controllers.
117