1 /*
2  * Sonics Silicon Backplane
3  * Broadcom MIPS core driver
4  *
5  * Copyright 2005, Broadcom Corporation
6  * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
7  *
8  * Licensed under the GNU/GPL. See COPYING for details.
9  */
10 
11 #include "ssb_private.h"
12 
13 #include <linux/ssb/ssb.h>
14 
15 #include <linux/mtd/physmap.h>
16 #include <linux/serial.h>
17 #include <linux/serial_core.h>
18 #include <linux/serial_reg.h>
19 #include <linux/time.h>
20 #ifdef CONFIG_BCM47XX
21 #include <linux/bcm47xx_nvram.h>
22 #endif
23 
24 static const char * const part_probes[] = { "bcm47xxpart", NULL };
25 
26 static struct physmap_flash_data ssb_pflash_data = {
27 	.part_probe_types	= part_probes,
28 };
29 
30 static struct resource ssb_pflash_resource = {
31 	.name	= "ssb_pflash",
32 	.flags  = IORESOURCE_MEM,
33 };
34 
35 struct platform_device ssb_pflash_dev = {
36 	.name		= "physmap-flash",
37 	.dev		= {
38 		.platform_data  = &ssb_pflash_data,
39 	},
40 	.resource	= &ssb_pflash_resource,
41 	.num_resources	= 1,
42 };
43 
mips_read32(struct ssb_mipscore * mcore,u16 offset)44 static inline u32 mips_read32(struct ssb_mipscore *mcore,
45 			      u16 offset)
46 {
47 	return ssb_read32(mcore->dev, offset);
48 }
49 
mips_write32(struct ssb_mipscore * mcore,u16 offset,u32 value)50 static inline void mips_write32(struct ssb_mipscore *mcore,
51 				u16 offset,
52 				u32 value)
53 {
54 	ssb_write32(mcore->dev, offset, value);
55 }
56 
57 static const u32 ipsflag_irq_mask[] = {
58 	0,
59 	SSB_IPSFLAG_IRQ1,
60 	SSB_IPSFLAG_IRQ2,
61 	SSB_IPSFLAG_IRQ3,
62 	SSB_IPSFLAG_IRQ4,
63 };
64 
65 static const u32 ipsflag_irq_shift[] = {
66 	0,
67 	SSB_IPSFLAG_IRQ1_SHIFT,
68 	SSB_IPSFLAG_IRQ2_SHIFT,
69 	SSB_IPSFLAG_IRQ3_SHIFT,
70 	SSB_IPSFLAG_IRQ4_SHIFT,
71 };
72 
ssb_irqflag(struct ssb_device * dev)73 static inline u32 ssb_irqflag(struct ssb_device *dev)
74 {
75 	u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
76 	if (tpsflag)
77 		return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
78 	else
79 		/* not irq supported */
80 		return 0x3f;
81 }
82 
find_device(struct ssb_device * rdev,int irqflag)83 static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
84 {
85 	struct ssb_bus *bus = rdev->bus;
86 	int i;
87 	for (i = 0; i < bus->nr_devices; i++) {
88 		struct ssb_device *dev;
89 		dev = &(bus->devices[i]);
90 		if (ssb_irqflag(dev) == irqflag)
91 			return dev;
92 	}
93 	return NULL;
94 }
95 
96 /* Get the MIPS IRQ assignment for a specified device.
97  * If unassigned, 0 is returned.
98  * If disabled, 5 is returned.
99  * If not supported, 6 is returned.
100  */
ssb_mips_irq(struct ssb_device * dev)101 unsigned int ssb_mips_irq(struct ssb_device *dev)
102 {
103 	struct ssb_bus *bus = dev->bus;
104 	struct ssb_device *mdev = bus->mipscore.dev;
105 	u32 irqflag;
106 	u32 ipsflag;
107 	u32 tmp;
108 	unsigned int irq;
109 
110 	irqflag = ssb_irqflag(dev);
111 	if (irqflag == 0x3f)
112 		return 6;
113 	ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
114 	for (irq = 1; irq <= 4; irq++) {
115 		tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
116 		if (tmp == irqflag)
117 			break;
118 	}
119 	if (irq	== 5) {
120 		if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
121 			irq = 0;
122 	}
123 
124 	return irq;
125 }
126 
clear_irq(struct ssb_bus * bus,unsigned int irq)127 static void clear_irq(struct ssb_bus *bus, unsigned int irq)
128 {
129 	struct ssb_device *dev = bus->mipscore.dev;
130 
131 	/* Clear the IRQ in the MIPScore backplane registers */
132 	if (irq == 0) {
133 		ssb_write32(dev, SSB_INTVEC, 0);
134 	} else {
135 		ssb_write32(dev, SSB_IPSFLAG,
136 			    ssb_read32(dev, SSB_IPSFLAG) |
137 			    ipsflag_irq_mask[irq]);
138 	}
139 }
140 
set_irq(struct ssb_device * dev,unsigned int irq)141 static void set_irq(struct ssb_device *dev, unsigned int irq)
142 {
143 	unsigned int oldirq = ssb_mips_irq(dev);
144 	struct ssb_bus *bus = dev->bus;
145 	struct ssb_device *mdev = bus->mipscore.dev;
146 	u32 irqflag = ssb_irqflag(dev);
147 
148 	BUG_ON(oldirq == 6);
149 
150 	dev->irq = irq + 2;
151 
152 	/* clear the old irq */
153 	if (oldirq == 0)
154 		ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
155 	else if (oldirq != 5)
156 		clear_irq(bus, oldirq);
157 
158 	/* assign the new one */
159 	if (irq == 0) {
160 		ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
161 	} else {
162 		u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
163 		if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
164 			u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
165 			struct ssb_device *olddev = find_device(dev, oldipsflag);
166 			if (olddev)
167 				set_irq(olddev, 0);
168 		}
169 		irqflag <<= ipsflag_irq_shift[irq];
170 		irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
171 		ssb_write32(mdev, SSB_IPSFLAG, irqflag);
172 	}
173 	dev_dbg(dev->dev, "set_irq: core 0x%04x, irq %d => %d\n",
174 		dev->id.coreid, oldirq+2, irq+2);
175 }
176 
print_irq(struct ssb_device * dev,unsigned int irq)177 static void print_irq(struct ssb_device *dev, unsigned int irq)
178 {
179 	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
180 	dev_dbg(dev->dev,
181 		"core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
182 		dev->id.coreid,
183 		irq_name[0], irq == 0 ? "*" : " ",
184 		irq_name[1], irq == 1 ? "*" : " ",
185 		irq_name[2], irq == 2 ? "*" : " ",
186 		irq_name[3], irq == 3 ? "*" : " ",
187 		irq_name[4], irq == 4 ? "*" : " ",
188 		irq_name[5], irq == 5 ? "*" : " ",
189 		irq_name[6], irq == 6 ? "*" : " ");
190 }
191 
dump_irq(struct ssb_bus * bus)192 static void dump_irq(struct ssb_bus *bus)
193 {
194 	int i;
195 	for (i = 0; i < bus->nr_devices; i++) {
196 		struct ssb_device *dev;
197 		dev = &(bus->devices[i]);
198 		print_irq(dev, ssb_mips_irq(dev));
199 	}
200 }
201 
ssb_mips_serial_init(struct ssb_mipscore * mcore)202 static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
203 {
204 	struct ssb_bus *bus = mcore->dev->bus;
205 
206 	if (ssb_extif_available(&bus->extif))
207 		mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
208 	else if (ssb_chipco_available(&bus->chipco))
209 		mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
210 	else
211 		mcore->nr_serial_ports = 0;
212 }
213 
ssb_mips_flash_detect(struct ssb_mipscore * mcore)214 static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
215 {
216 	struct ssb_bus *bus = mcore->dev->bus;
217 	struct ssb_sflash *sflash = &mcore->sflash;
218 	struct ssb_pflash *pflash = &mcore->pflash;
219 
220 	/* When there is no chipcommon on the bus there is 4MB flash */
221 	if (!ssb_chipco_available(&bus->chipco)) {
222 		pflash->present = true;
223 		pflash->buswidth = 2;
224 		pflash->window = SSB_FLASH1;
225 		pflash->window_size = SSB_FLASH1_SZ;
226 		goto ssb_pflash;
227 	}
228 
229 	/* There is ChipCommon, so use it to read info about flash */
230 	switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
231 	case SSB_CHIPCO_FLASHT_STSER:
232 	case SSB_CHIPCO_FLASHT_ATSER:
233 		dev_dbg(mcore->dev->dev, "Found serial flash\n");
234 		ssb_sflash_init(&bus->chipco);
235 		break;
236 	case SSB_CHIPCO_FLASHT_PARA:
237 		dev_dbg(mcore->dev->dev, "Found parallel flash\n");
238 		pflash->present = true;
239 		pflash->window = SSB_FLASH2;
240 		pflash->window_size = SSB_FLASH2_SZ;
241 		if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
242 		               & SSB_CHIPCO_CFG_DS16) == 0)
243 			pflash->buswidth = 1;
244 		else
245 			pflash->buswidth = 2;
246 		break;
247 	}
248 
249 ssb_pflash:
250 	if (sflash->present) {
251 #ifdef CONFIG_BCM47XX
252 		bcm47xx_nvram_init_from_mem(sflash->window, sflash->size);
253 #endif
254 	} else if (pflash->present) {
255 #ifdef CONFIG_BCM47XX
256 		bcm47xx_nvram_init_from_mem(pflash->window, pflash->window_size);
257 #endif
258 
259 		ssb_pflash_data.width = pflash->buswidth;
260 		ssb_pflash_resource.start = pflash->window;
261 		ssb_pflash_resource.end = pflash->window + pflash->window_size;
262 	}
263 }
264 
ssb_cpu_clock(struct ssb_mipscore * mcore)265 u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
266 {
267 	struct ssb_bus *bus = mcore->dev->bus;
268 	u32 pll_type, n, m, rate = 0;
269 
270 	if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
271 		return ssb_pmu_get_cpu_clock(&bus->chipco);
272 
273 	if (ssb_extif_available(&bus->extif)) {
274 		ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
275 	} else if (ssb_chipco_available(&bus->chipco)) {
276 		ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
277 	} else
278 		return 0;
279 
280 	if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
281 		rate = 200000000;
282 	} else {
283 		rate = ssb_calc_clock_rate(pll_type, n, m);
284 	}
285 
286 	if (pll_type == SSB_PLLTYPE_6) {
287 		rate *= 2;
288 	}
289 
290 	return rate;
291 }
292 
ssb_mipscore_init(struct ssb_mipscore * mcore)293 void ssb_mipscore_init(struct ssb_mipscore *mcore)
294 {
295 	struct ssb_bus *bus;
296 	struct ssb_device *dev;
297 	unsigned long hz, ns;
298 	unsigned int irq, i;
299 
300 	if (!mcore->dev)
301 		return; /* We don't have a MIPS core */
302 
303 	dev_dbg(mcore->dev->dev, "Initializing MIPS core...\n");
304 
305 	bus = mcore->dev->bus;
306 	hz = ssb_clockspeed(bus);
307 	if (!hz)
308 		hz = 100000000;
309 	ns = 1000000000 / hz;
310 
311 	if (ssb_extif_available(&bus->extif))
312 		ssb_extif_timing_init(&bus->extif, ns);
313 	else if (ssb_chipco_available(&bus->chipco))
314 		ssb_chipco_timing_init(&bus->chipco, ns);
315 
316 	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
317 	for (irq = 2, i = 0; i < bus->nr_devices; i++) {
318 		int mips_irq;
319 		dev = &(bus->devices[i]);
320 		mips_irq = ssb_mips_irq(dev);
321 		if (mips_irq > 4)
322 			dev->irq = 0;
323 		else
324 			dev->irq = mips_irq + 2;
325 		if (dev->irq > 5)
326 			continue;
327 		switch (dev->id.coreid) {
328 		case SSB_DEV_USB11_HOST:
329 			/* shouldn't need a separate irq line for non-4710, most of them have a proper
330 			 * external usb controller on the pci */
331 			if ((bus->chip_id == 0x4710) && (irq <= 4)) {
332 				set_irq(dev, irq++);
333 			}
334 			break;
335 		case SSB_DEV_PCI:
336 		case SSB_DEV_ETHERNET:
337 		case SSB_DEV_ETHERNET_GBIT:
338 		case SSB_DEV_80211:
339 		case SSB_DEV_USB20_HOST:
340 			/* These devices get their own IRQ line if available, the rest goes on IRQ0 */
341 			if (irq <= 4) {
342 				set_irq(dev, irq++);
343 				break;
344 			}
345 			fallthrough;
346 		case SSB_DEV_EXTIF:
347 			set_irq(dev, 0);
348 			break;
349 		}
350 	}
351 	dev_dbg(mcore->dev->dev, "after irq reconfiguration\n");
352 	dump_irq(bus);
353 
354 	ssb_mips_serial_init(mcore);
355 	ssb_mips_flash_detect(mcore);
356 }
357