1# SPDX-License-Identifier: GPL-2.0-only
2config QCOM_TSENS
3	tristate "Qualcomm TSENS Temperature Alarm"
4	depends on QCOM_QFPROM
5	depends on ARCH_QCOM || COMPILE_TEST
6	help
7	  This enables the thermal sysfs driver for the TSENS device. It shows
8	  up in Sysfs as a thermal zone with multiple trip points. Disabling the
9	  thermal zone device via the mode file results in disabling the sensor.
10	  Also able to set threshold temperature for both hot and cold and update
11	  when a threshold is reached.
12
13config QCOM_SPMI_ADC_TM5
14	tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5"
15	depends on OF && SPMI && IIO
16	select REGMAP_SPMI
17	select QCOM_VADC_COMMON
18	help
19	  This enables the thermal driver for the ADC thermal monitoring
20	  device. It shows up as a thermal zone with multiple trip points.
21	  Thermal client sets threshold temperature for both warm and cool and
22	  gets updated when a threshold is reached.
23
24config QCOM_SPMI_TEMP_ALARM
25	tristate "Qualcomm SPMI PMIC Temperature Alarm"
26	depends on OF && SPMI && IIO
27	select REGMAP_SPMI
28	help
29	  This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
30	  PMIC devices. It shows up in sysfs as a thermal sensor with multiple
31	  trip points. The temperature reported by the thermal sensor reflects the
32	  real time die temperature if an ADC is present or an estimate of the
33	  temperature based upon the over temperature stage value.
34
35config QCOM_LMH
36	tristate "Qualcomm Limits Management Hardware"
37	depends on ARCH_QCOM && QCOM_SCM
38	help
39	  This enables initialization of Qualcomm limits management
40	  hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
41	  input from temperature and current sensors.  On many newer Qualcomm SoCs
42	  LMh is configured in the firmware and this feature need not be enabled.
43	  However, on certain SoCs like sdm845 LMh has to be configured from kernel.
44