1/*
2 * Device Tree Source for Qualcomm MDM9615 SoC
3 *
4 * Copyright (C) 2016 BayLibre, SAS.
5 * Author : Neil Armstrong <narmstrong@baylibre.com>
6 *
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
10 * whole.
11 *
12 *  a) This file is free software; you can redistribute it and/or
13 *     modify it under the terms of the GNU General Public License as
14 *     published by the Free Software Foundation; either version 2 of the
15 *     License, or (at your option) any later version.
16 *
17 *     This file is distributed in the hope that it will be useful,
18 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
19 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20 *     GNU General Public License for more details.
21 *
22 * Or, alternatively,
23 *
24 *  b) Permission is hereby granted, free of charge, to any person
25 *     obtaining a copy of this software and associated documentation
26 *     files (the "Software"), to deal in the Software without
27 *     restriction, including without limitation the rights to use,
28 *     copy, modify, merge, publish, distribute, sublicense, and/or
29 *     sell copies of the Software, and to permit persons to whom the
30 *     Software is furnished to do so, subject to the following
31 *     conditions:
32 *
33 *     The above copyright notice and this permission notice shall be
34 *     included in all copies or substantial portions of the Software.
35 *
36 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
37 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
38 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
39 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
40 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
41 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
42 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
43 *     OTHER DEALINGS IN THE SOFTWARE.
44 */
45
46/dts-v1/;
47
48#include <dt-bindings/interrupt-controller/arm-gic.h>
49#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
50#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
51#include <dt-bindings/mfd/qcom-rpm.h>
52#include <dt-bindings/soc/qcom,gsbi.h>
53
54/ {
55	#address-cells = <1>;
56	#size-cells = <1>;
57	model = "Qualcomm MDM9615";
58	compatible = "qcom,mdm9615";
59	interrupt-parent = <&intc>;
60
61	cpus {
62		#address-cells = <1>;
63		#size-cells = <0>;
64
65		cpu0: cpu@0 {
66			compatible = "arm,cortex-a5";
67			device_type = "cpu";
68			next-level-cache = <&L2>;
69		};
70	};
71
72	cpu-pmu {
73		compatible = "arm,cortex-a5-pmu";
74		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
75	};
76
77	clocks {
78		cxo_board {
79			compatible = "fixed-clock";
80			#clock-cells = <0>;
81			clock-frequency = <19200000>;
82		};
83	};
84
85	regulators {
86		vsdcc_fixed: vsdcc-regulator {
87			compatible = "regulator-fixed";
88			regulator-name = "SDCC Power";
89			regulator-min-microvolt = <2700000>;
90			regulator-max-microvolt = <2700000>;
91			regulator-always-on;
92		};
93	};
94
95	soc: soc {
96		#address-cells = <1>;
97		#size-cells = <1>;
98		ranges;
99		compatible = "simple-bus";
100
101		L2: cache-controller@2040000 {
102			compatible = "arm,pl310-cache";
103			reg = <0x02040000 0x1000>;
104			arm,data-latency = <2 2 0>;
105			cache-unified;
106			cache-level = <2>;
107		};
108
109		intc: interrupt-controller@2000000 {
110			compatible = "qcom,msm-qgic2";
111			interrupt-controller;
112			#interrupt-cells = <3>;
113			reg = <0x02000000 0x1000>,
114			      <0x02002000 0x1000>;
115		};
116
117		timer@200a000 {
118			compatible = "qcom,kpss-timer", "qcom,msm-timer";
119			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
120				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
121				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
122			reg = <0x0200a000 0x100>;
123			clock-frequency = <27000000>,
124					  <32768>;
125			cpu-offset = <0x80000>;
126		};
127
128		msmgpio: pinctrl@800000 {
129			compatible = "qcom,mdm9615-pinctrl";
130			gpio-controller;
131			gpio-ranges = <&msmgpio 0 0 88>;
132			#gpio-cells = <2>;
133			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
134			interrupt-controller;
135			#interrupt-cells = <2>;
136			reg = <0x800000 0x4000>;
137		};
138
139		gcc: clock-controller@900000 {
140			compatible = "qcom,gcc-mdm9615";
141			#clock-cells = <1>;
142			#reset-cells = <1>;
143			reg = <0x900000 0x4000>;
144		};
145
146		lcc: clock-controller@28000000 {
147			compatible = "qcom,lcc-mdm9615";
148			reg = <0x28000000 0x1000>;
149			#clock-cells = <1>;
150			#reset-cells = <1>;
151		};
152
153		l2cc: clock-controller@2011000 {
154			compatible = "syscon";
155			reg = <0x02011000 0x1000>;
156		};
157
158		rng@1a500000 {
159			compatible = "qcom,prng";
160			reg = <0x1a500000 0x200>;
161			clocks = <&gcc PRNG_CLK>;
162			clock-names = "core";
163			assigned-clocks = <&gcc PRNG_CLK>;
164			assigned-clock-rates = <32000000>;
165		};
166
167		gsbi2: gsbi@16100000 {
168			compatible = "qcom,gsbi-v1.0.0";
169			cell-index = <2>;
170			reg = <0x16100000 0x100>;
171			clocks = <&gcc GSBI2_H_CLK>;
172			clock-names = "iface";
173			status = "disabled";
174			#address-cells = <1>;
175			#size-cells = <1>;
176			ranges;
177
178			gsbi2_i2c: i2c@16180000 {
179				compatible = "qcom,i2c-qup-v1.1.1";
180				#address-cells = <1>;
181				#size-cells = <0>;
182				reg = <0x16180000 0x1000>;
183				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
184
185				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
186				clock-names = "core", "iface";
187				status = "disabled";
188			};
189		};
190
191		gsbi3: gsbi@16200000 {
192			compatible = "qcom,gsbi-v1.0.0";
193			cell-index = <3>;
194			reg = <0x16200000 0x100>;
195			clocks = <&gcc GSBI3_H_CLK>;
196			clock-names = "iface";
197			status = "disabled";
198			#address-cells = <1>;
199			#size-cells = <1>;
200			ranges;
201
202			gsbi3_spi: spi@16280000 {
203				compatible = "qcom,spi-qup-v1.1.1";
204				#address-cells = <1>;
205				#size-cells = <0>;
206				reg = <0x16280000 0x1000>;
207				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
208				spi-max-frequency = <24000000>;
209
210				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
211				clock-names = "core", "iface";
212				status = "disabled";
213			};
214		};
215
216		gsbi4: gsbi@16300000 {
217			compatible = "qcom,gsbi-v1.0.0";
218			cell-index = <4>;
219			reg = <0x16300000 0x100>;
220			clocks = <&gcc GSBI4_H_CLK>;
221			clock-names = "iface";
222			status = "disabled";
223			#address-cells = <1>;
224			#size-cells = <1>;
225			ranges;
226
227			syscon-tcsr = <&tcsr>;
228
229			gsbi4_serial: serial@16340000 {
230				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
231				reg = <0x16340000 0x1000>,
232				      <0x16300000 0x1000>;
233				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
234				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
235				clock-names = "core", "iface";
236				status = "disabled";
237			};
238		};
239
240		gsbi5: gsbi@16400000 {
241			compatible = "qcom,gsbi-v1.0.0";
242			cell-index = <5>;
243			reg = <0x16400000 0x100>;
244			clocks = <&gcc GSBI5_H_CLK>;
245			clock-names = "iface";
246			status = "disabled";
247			#address-cells = <1>;
248			#size-cells = <1>;
249			ranges;
250
251			syscon-tcsr = <&tcsr>;
252
253			gsbi5_i2c: i2c@16480000 {
254				compatible = "qcom,i2c-qup-v1.1.1";
255				#address-cells = <1>;
256				#size-cells = <0>;
257				reg = <0x16480000 0x1000>;
258				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
259
260				/* QUP clock is not initialized, set rate */
261				assigned-clocks = <&gcc GSBI5_QUP_CLK>;
262				assigned-clock-rates = <24000000>;
263
264				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
265				clock-names = "core", "iface";
266				status = "disabled";
267			};
268
269			gsbi5_serial: serial@16440000 {
270				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
271				reg = <0x16440000 0x1000>,
272				      <0x16400000 0x1000>;
273				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
274				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
275				clock-names = "core", "iface";
276				status = "disabled";
277			};
278		};
279
280		qcom,ssbi@500000 {
281			compatible = "qcom,ssbi";
282			reg = <0x500000 0x1000>;
283			qcom,controller-type = "pmic-arbiter";
284
285			pmicintc: pmic@0 {
286				compatible = "qcom,pm8018", "qcom,pm8921";
287				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
288				#interrupt-cells = <2>;
289				interrupt-controller;
290				#address-cells = <1>;
291				#size-cells = <0>;
292
293				pwrkey@1c {
294					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
295					reg = <0x1c>;
296					interrupt-parent = <&pmicintc>;
297					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
298						     <51 IRQ_TYPE_EDGE_RISING>;
299					debounce = <15625>;
300					pull-up;
301				};
302
303				pmicmpp: mpps@50 {
304					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
305					interrupt-controller;
306					#interrupt-cells = <2>;
307					reg = <0x50>;
308					gpio-controller;
309					#gpio-cells = <2>;
310					gpio-ranges = <&pmicmpp 0 0 6>;
311				};
312
313				rtc@11d {
314					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
315					interrupt-parent = <&pmicintc>;
316					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
317					reg = <0x11d>;
318					allow-set-time;
319				};
320
321				pmicgpio: gpio@150 {
322					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
323					interrupt-controller;
324					#interrupt-cells = <2>;
325					gpio-controller;
326					gpio-ranges = <&pmicgpio 0 0 6>;
327					#gpio-cells = <2>;
328				};
329			};
330		};
331
332		sdcc1bam: dma@12182000{
333			compatible = "qcom,bam-v1.3.0";
334			reg = <0x12182000 0x8000>;
335			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
336			clocks = <&gcc SDC1_H_CLK>;
337			clock-names = "bam_clk";
338			#dma-cells = <1>;
339			qcom,ee = <0>;
340		};
341
342		sdcc2bam: dma@12142000{
343			compatible = "qcom,bam-v1.3.0";
344			reg = <0x12142000 0x8000>;
345			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
346			clocks = <&gcc SDC2_H_CLK>;
347			clock-names = "bam_clk";
348			#dma-cells = <1>;
349			qcom,ee = <0>;
350		};
351
352		amba {
353			compatible = "simple-bus";
354			#address-cells = <1>;
355			#size-cells = <1>;
356			ranges;
357			sdcc1: mmc@12180000 {
358				status = "disabled";
359				compatible = "arm,pl18x", "arm,primecell";
360				arm,primecell-periphid = <0x00051180>;
361				reg = <0x12180000 0x2000>;
362				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
363				interrupt-names	= "cmd_irq";
364				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
365				clock-names = "mclk", "apb_pclk";
366				bus-width = <8>;
367				max-frequency = <48000000>;
368				cap-sd-highspeed;
369				cap-mmc-highspeed;
370				vmmc-supply = <&vsdcc_fixed>;
371				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
372				dma-names = "tx", "rx";
373				assigned-clocks = <&gcc SDC1_CLK>;
374				assigned-clock-rates = <400000>;
375			};
376
377			sdcc2: mmc@12140000 {
378				compatible = "arm,pl18x", "arm,primecell";
379				arm,primecell-periphid = <0x00051180>;
380				status = "disabled";
381				reg = <0x12140000 0x2000>;
382				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
383				interrupt-names	= "cmd_irq";
384				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
385				clock-names = "mclk", "apb_pclk";
386				bus-width = <4>;
387				cap-sd-highspeed;
388				cap-mmc-highspeed;
389				max-frequency = <48000000>;
390				no-1-8-v;
391				vmmc-supply = <&vsdcc_fixed>;
392				dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
393				dma-names = "tx", "rx";
394				assigned-clocks = <&gcc SDC2_CLK>;
395				assigned-clock-rates = <400000>;
396			};
397		};
398
399		tcsr: syscon@1a400000 {
400			compatible = "qcom,tcsr-mdm9615", "syscon";
401			reg = <0x1a400000 0x100>;
402		};
403
404		rpm: rpm@108000 {
405			compatible = "qcom,rpm-mdm9615";
406			reg = <0x108000 0x1000>;
407
408			qcom,ipc = <&l2cc 0x8 2>;
409
410			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
411				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
412				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
413			interrupt-names	= "ack", "err", "wakeup";
414
415			regulators {
416				compatible = "qcom,rpm-pm8018-regulators";
417
418				vin_lvs1-supply = <&pm8018_s3>;
419
420				vdd_l7-supply = <&pm8018_s4>;
421				vdd_l8-supply = <&pm8018_s3>;
422				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
423
424				/* Buck SMPS */
425				pm8018_s1: s1 {
426					regulator-min-microvolt = <500000>;
427					regulator-max-microvolt = <1150000>;
428					qcom,switch-mode-frequency = <1600000>;
429					bias-pull-down;
430				};
431
432				pm8018_s2: s2 {
433					regulator-min-microvolt = <1225000>;
434					regulator-max-microvolt = <1300000>;
435					qcom,switch-mode-frequency = <1600000>;
436					bias-pull-down;
437				};
438
439				pm8018_s3: s3 {
440					regulator-always-on;
441					regulator-min-microvolt = <1800000>;
442					regulator-max-microvolt = <1800000>;
443					qcom,switch-mode-frequency = <1600000>;
444					bias-pull-down;
445				};
446
447				pm8018_s4: s4 {
448					regulator-min-microvolt = <2100000>;
449					regulator-max-microvolt = <2200000>;
450					qcom,switch-mode-frequency = <1600000>;
451					bias-pull-down;
452				};
453
454				pm8018_s5: s5 {
455					regulator-always-on;
456					regulator-min-microvolt = <1350000>;
457					regulator-max-microvolt = <1350000>;
458					qcom,switch-mode-frequency = <1600000>;
459					bias-pull-down;
460				};
461
462				/* PMOS LDO */
463				pm8018_l2: l2 {
464					regulator-always-on;
465					regulator-min-microvolt = <1800000>;
466					regulator-max-microvolt = <1800000>;
467					bias-pull-down;
468				};
469
470				pm8018_l3: l3 {
471					regulator-always-on;
472					regulator-min-microvolt = <1800000>;
473					regulator-max-microvolt = <1800000>;
474					bias-pull-down;
475				};
476
477				pm8018_l4: l4 {
478					regulator-min-microvolt = <3300000>;
479					regulator-max-microvolt = <3300000>;
480					bias-pull-down;
481				};
482
483				pm8018_l5: l5 {
484					regulator-min-microvolt = <2850000>;
485					regulator-max-microvolt = <2850000>;
486					bias-pull-down;
487				};
488
489				pm8018_l6: l6 {
490					regulator-min-microvolt = <1800000>;
491					regulator-max-microvolt = <2850000>;
492					bias-pull-down;
493				};
494
495				pm8018_l7: l7 {
496					regulator-min-microvolt = <1850000>;
497					regulator-max-microvolt = <1900000>;
498					bias-pull-down;
499				};
500
501				pm8018_l8: l8 {
502					regulator-min-microvolt = <1200000>;
503					regulator-max-microvolt = <1200000>;
504					bias-pull-down;
505				};
506
507				pm8018_l9: l9 {
508					regulator-min-microvolt = <750000>;
509					regulator-max-microvolt = <1150000>;
510					bias-pull-down;
511				};
512
513				pm8018_l10: l10 {
514					regulator-min-microvolt = <1050000>;
515					regulator-max-microvolt = <1050000>;
516					bias-pull-down;
517				};
518
519				pm8018_l11: l11 {
520					regulator-min-microvolt = <1050000>;
521					regulator-max-microvolt = <1050000>;
522					bias-pull-down;
523				};
524
525				pm8018_l12: l12 {
526					regulator-min-microvolt = <1050000>;
527					regulator-max-microvolt = <1050000>;
528					bias-pull-down;
529				};
530
531				pm8018_l13: l13 {
532					regulator-min-microvolt = <1850000>;
533					regulator-max-microvolt = <2950000>;
534					bias-pull-down;
535				};
536
537				pm8018_l14: l14 {
538					regulator-min-microvolt = <2850000>;
539					regulator-max-microvolt = <2850000>;
540					bias-pull-down;
541				};
542
543				/* Low Voltage Switch */
544				pm8018_lvs1: lvs1 {
545					bias-pull-down;
546				};
547			};
548		};
549	};
550};
551