1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com>
4 */
5
6/dts-v1/;
7#include <dt-bindings/input/input.h>
8#include "rk3066a.dtsi"
9
10/ {
11	model = "Rikomagic MK808";
12	compatible = "rikomagic,mk808", "rockchip,rk3066a";
13
14	aliases {
15		mmc0 = &mmc0;
16		mmc1 = &mmc1;
17	};
18
19	chosen {
20		stdout-path = "serial2:115200n8";
21	};
22
23	memory@60000000 {
24		reg = <0x60000000 0x40000000>;
25		device_type = "memory";
26	};
27
28	adc-keys {
29		compatible = "adc-keys";
30		io-channels = <&saradc 1>;
31		io-channel-names = "buttons";
32		keyup-threshold-microvolt = <2500000>;
33		poll-interval = <100>;
34
35		recovery {
36			label = "recovery";
37			linux,code = <KEY_VENDOR>;
38			press-threshold-microvolt = <0>;
39		};
40	};
41
42	gpio-leds {
43		compatible = "gpio-leds";
44
45		blue_led: led-0 {
46			label = "mk808:blue:power";
47			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
48			default-state = "off";
49			linux,default-trigger = "default-on";
50		};
51	};
52
53	hdmi_con {
54		compatible = "hdmi-connector";
55		type = "c";
56
57		port {
58			hdmi_con_in: endpoint {
59				remote-endpoint = <&hdmi_out_con>;
60			};
61		};
62	};
63
64	vcc_2v5: vcc-2v5 {
65		compatible = "regulator-fixed";
66		regulator-name = "vcc_2v5";
67		regulator-min-microvolt = <2500000>;
68		regulator-max-microvolt = <2500000>;
69	};
70
71	vcc_io: vcc-io {
72		compatible = "regulator-fixed";
73		regulator-name = "vcc_io";
74		regulator-min-microvolt = <3300000>;
75		regulator-max-microvolt = <3300000>;
76	};
77
78	vcc_host: usb-host-regulator {
79		compatible = "regulator-fixed";
80		enable-active-high;
81		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
82		pinctrl-0 = <&host_drv>;
83		pinctrl-names = "default";
84		regulator-always-on;
85		regulator-name = "host-pwr";
86		regulator-min-microvolt = <5000000>;
87		regulator-max-microvolt = <5000000>;
88		startup-delay-us = <100000>;
89		vin-supply = <&vcc_io>;
90	};
91
92	vcc_otg: usb-otg-regulator {
93		compatible = "regulator-fixed";
94		enable-active-high;
95		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
96		pinctrl-0 = <&otg_drv>;
97		pinctrl-names = "default";
98		regulator-always-on;
99		regulator-name = "vcc_otg";
100		regulator-min-microvolt = <5000000>;
101		regulator-max-microvolt = <5000000>;
102		startup-delay-us = <100000>;
103		vin-supply = <&vcc_io>;
104	};
105
106	vcc_sd: sdmmc-regulator {
107		compatible = "regulator-fixed";
108		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
109		pinctrl-0 = <&sdmmc_pwr>;
110		pinctrl-names = "default";
111		regulator-name = "vcc_sd";
112		regulator-min-microvolt = <3300000>;
113		regulator-max-microvolt = <3300000>;
114		startup-delay-us = <100000>;
115		vin-supply = <&vcc_io>;
116	};
117
118	vcc_wifi: sdio-regulator {
119		compatible = "regulator-fixed";
120		enable-active-high;
121		gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
122		pinctrl-0 = <&wifi_pwr>;
123		pinctrl-names = "default";
124		regulator-name = "vcc_wifi";
125		regulator-min-microvolt = <3300000>;
126		regulator-max-microvolt = <3300000>;
127		startup-delay-us = <100000>;
128		vin-supply = <&vcc_io>;
129	};
130};
131
132&hdmi {
133	status = "okay";
134};
135
136&hdmi_in_vop1 {
137	status = "disabled";
138};
139
140&hdmi_out {
141	hdmi_out_con: endpoint {
142		remote-endpoint = <&hdmi_con_in>;
143	};
144};
145
146&mmc0 {
147	bus-width = <4>;
148	cap-mmc-highspeed;
149	cap-sd-highspeed;
150	vmmc-supply = <&vcc_sd>;
151	status = "okay";
152};
153
154&mmc1 {
155	bus-width = <4>;
156	non-removable;
157	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
158	pinctrl-names = "default";
159	vmmc-supply = <&vcc_wifi>;
160	status = "okay";
161};
162
163&pinctrl {
164	usb-host {
165		host_drv: host-drv {
166			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
167		};
168	};
169
170	usb-otg {
171		otg_drv: otg-drv {
172			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
173		};
174	};
175
176	sdmmc {
177		sdmmc_pwr: sdmmc-pwr {
178			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
179		};
180	};
181
182	sdio {
183		wifi_pwr: wifi-pwr {
184			rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
185		};
186	};
187};
188
189&saradc {
190	vref-supply = <&vcc_2v5>;
191	status = "okay";
192};
193
194&uart2 {
195	status = "okay";
196};
197
198&usb_host {
199	status = "okay";
200};
201
202&usb_otg {
203	status = "okay";
204};
205
206&usbphy {
207	status = "okay";
208};
209
210&vop0 {
211	status = "okay";
212};
213
214&wdt {
215	status = "okay";
216};
217