1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * test module to check whether the TSC-based delay routine continues
4 * to work properly after cpufreq transitions. Needs ACPI to work
5 * properly.
6 *
7 * Based partly on the Power Management Timer (PMTMR) code to be found
8 * in arch/i386/kernel/timers/timer_pm.c on recent 2.6. kernels, especially
9 * code written by John Stultz. The read_pmtmr function was copied verbatim
10 * from that file.
11 *
12 * (C) 2004 Dominik Brodowski
13 *
14 * To use:
15 * 1.) pass clock=tsc to the kernel on your bootloader
16 * 2.) modprobe this module (it'll fail)
17 * 3.) change CPU frequency
18 * 4.) modprobe this module again
19 * 5.) if the third value, "diff_pmtmr", changes between 2. and 4., the
20 * TSC-based delay routine on the Linux kernel does not correctly
21 * handle the cpufreq transition. Please report this to
22 * linux-pm@vger.kernel.org
23 */
24
25 #include <linux/kernel.h>
26 #include <linux/module.h>
27 #include <linux/init.h>
28 #include <linux/delay.h>
29 #include <linux/acpi.h>
30 #include <asm/io.h>
31
32 static int pm_tmr_ioport = 0;
33
34 /*helper function to safely read acpi pm timesource*/
read_pmtmr(void)35 static u32 read_pmtmr(void)
36 {
37 u32 v1=0,v2=0,v3=0;
38 /* It has been reported that because of various broken
39 * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time
40 * source is not latched, so you must read it multiple
41 * times to insure a safe value is read.
42 */
43 do {
44 v1 = inl(pm_tmr_ioport);
45 v2 = inl(pm_tmr_ioport);
46 v3 = inl(pm_tmr_ioport);
47 } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
48 || (v3 > v1 && v3 < v2));
49
50 /* mask the output to 24 bits */
51 return (v2 & 0xFFFFFF);
52 }
53
cpufreq_test_tsc(void)54 static int __init cpufreq_test_tsc(void)
55 {
56 u32 now, then, diff;
57 u64 now_tsc, then_tsc, diff_tsc;
58 int i;
59
60 /* the following code snipped is copied from arch/x86/kernel/acpi/boot.c
61 of Linux v2.6.25. */
62
63 /* detect the location of the ACPI PM Timer */
64 if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) {
65 /* FADT rev. 2 */
66 if (acpi_gbl_FADT.xpm_timer_block.space_id !=
67 ACPI_ADR_SPACE_SYSTEM_IO)
68 return 0;
69
70 pm_tmr_ioport = acpi_gbl_FADT.xpm_timer_block.address;
71 /*
72 * "X" fields are optional extensions to the original V1.0
73 * fields, so we must selectively expand V1.0 fields if the
74 * corresponding X field is zero.
75 */
76 if (!pm_tmr_ioport)
77 pm_tmr_ioport = acpi_gbl_FADT.pm_timer_block;
78 } else {
79 /* FADT rev. 1 */
80 pm_tmr_ioport = acpi_gbl_FADT.pm_timer_block;
81 }
82
83 printk(KERN_DEBUG "start--> \n");
84 then = read_pmtmr();
85 then_tsc = rdtsc();
86 for (i=0;i<20;i++) {
87 mdelay(100);
88 now = read_pmtmr();
89 now_tsc = rdtsc();
90 diff = (now - then) & 0xFFFFFF;
91 diff_tsc = now_tsc - then_tsc;
92 printk(KERN_DEBUG "t1: %08u t2: %08u diff_pmtmr: %08u diff_tsc: %016llu\n", then, now, diff, diff_tsc);
93 then = now;
94 then_tsc = now_tsc;
95 }
96 printk(KERN_DEBUG "<-- end \n");
97 return -ENODEV;
98 }
99
cpufreq_none(void)100 static void __exit cpufreq_none(void)
101 {
102 return;
103 }
104
105 module_init(cpufreq_test_tsc)
106 module_exit(cpufreq_none)
107
108
109 MODULE_AUTHOR("Dominik Brodowski");
110 MODULE_DESCRIPTION("Verify the TSC cpufreq notifier working correctly -- needs ACPI-enabled system");
111 MODULE_LICENSE ("GPL");
112