1 // SPDX-License-Identifier: BSD-2-Clause
2 /*
3  * Copyright (c) 2017-2018, STMicroelectronics
4  */
5 
6 #include <compiler.h>
7 #include <console.h>
8 #include <drivers/clk.h>
9 #include <drivers/clk_dt.h>
10 #include <drivers/serial.h>
11 #include <drivers/stm32_uart.h>
12 #include <io.h>
13 #include <keep.h>
14 #include <kernel/delay.h>
15 #include <kernel/dt.h>
16 #include <kernel/panic.h>
17 #include <libfdt.h>
18 #include <stm32_util.h>
19 #include <util.h>
20 
21 #define UART_REG_CR1			0x00	/* Control register 1 */
22 #define UART_REG_CR2			0x04	/* Control register 2 */
23 #define UART_REG_CR3			0x08	/* Control register 3 */
24 #define UART_REG_BRR			0x0c	/* Baud rate register */
25 #define UART_REG_RQR			0x18	/* Request register */
26 #define UART_REG_ISR			0x1c	/* Interrupt & status reg. */
27 #define UART_REG_ICR			0x20	/* Interrupt flag clear reg. */
28 #define UART_REG_RDR			0x24	/* Receive data register */
29 #define UART_REG_TDR			0x28	/* Transmit data register */
30 #define UART_REG_PRESC			0x2c	/* Prescaler register */
31 
32 #define PUTC_TIMEOUT_US			1000
33 #define FLUSH_TIMEOUT_US		16000
34 
35 /*
36  * Uart Interrupt & status register bits
37  *
38  * Bit 5 RXNE: Read data register not empty/RXFIFO not empty
39  * Bit 6 TC: Transmission complete
40  * Bit 7 TXE/TXFNF: Transmit data register empty/TXFIFO not full
41  * Bit 27 TXFE: TXFIFO threshold reached
42  */
43 #define USART_ISR_RXNE_RXFNE		BIT(5)
44 #define USART_ISR_TC			BIT(6)
45 #define USART_ISR_TXE_TXFNF		BIT(7)
46 #define USART_ISR_TXFE			BIT(27)
47 
loc_chip_to_base(struct serial_chip * chip)48 static vaddr_t loc_chip_to_base(struct serial_chip *chip)
49 {
50 	struct stm32_uart_pdata *pd = NULL;
51 
52 	pd = container_of(chip, struct stm32_uart_pdata, chip);
53 
54 	return io_pa_or_va(&pd->base, 1);
55 }
56 
loc_flush(struct serial_chip * chip)57 static void loc_flush(struct serial_chip *chip)
58 {
59 	vaddr_t base = loc_chip_to_base(chip);
60 	uint64_t timeout = timeout_init_us(FLUSH_TIMEOUT_US);
61 
62 	while (!(io_read32(base + UART_REG_ISR) & USART_ISR_TXFE))
63 		if (timeout_elapsed(timeout))
64 			return;
65 }
66 
loc_putc(struct serial_chip * chip,int ch)67 static void loc_putc(struct serial_chip *chip, int ch)
68 {
69 	vaddr_t base = loc_chip_to_base(chip);
70 	uint64_t timeout = timeout_init_us(PUTC_TIMEOUT_US);
71 
72 	while (!(io_read32(base + UART_REG_ISR) & USART_ISR_TXE_TXFNF))
73 		if (timeout_elapsed(timeout))
74 			return;
75 
76 	io_write32(base + UART_REG_TDR, ch);
77 }
78 
loc_have_rx_data(struct serial_chip * chip)79 static bool loc_have_rx_data(struct serial_chip *chip)
80 {
81 	vaddr_t base = loc_chip_to_base(chip);
82 
83 	return io_read32(base + UART_REG_ISR) & USART_ISR_RXNE_RXFNE;
84 }
85 
loc_getchar(struct serial_chip * chip)86 static int loc_getchar(struct serial_chip *chip)
87 {
88 	vaddr_t base = loc_chip_to_base(chip);
89 
90 	while (!loc_have_rx_data(chip))
91 		;
92 
93 	return io_read32(base + UART_REG_RDR) & 0xff;
94 }
95 
96 static const struct serial_ops stm32_uart_serial_ops = {
97 	.flush = loc_flush,
98 	.putc = loc_putc,
99 	.have_rx_data = loc_have_rx_data,
100 	.getchar = loc_getchar,
101 
102 };
103 DECLARE_KEEP_PAGER(stm32_uart_serial_ops);
104 
stm32_uart_init(struct stm32_uart_pdata * pd,vaddr_t base)105 void stm32_uart_init(struct stm32_uart_pdata *pd, vaddr_t base)
106 {
107 	pd->base.pa = base;
108 	pd->chip.ops = &stm32_uart_serial_ops;
109 }
110 
111 #ifdef CFG_DT
register_secure_uart(struct stm32_uart_pdata * pd)112 static void register_secure_uart(struct stm32_uart_pdata *pd)
113 {
114 	size_t n = 0;
115 
116 	stm32mp_register_secure_periph_iomem(pd->base.pa);
117 	for (n = 0; n < pd->pinctrl_count; n++)
118 		stm32mp_register_secure_gpio(pd->pinctrl[n].bank,
119 					     pd->pinctrl[n].pin);
120 }
121 
register_non_secure_uart(struct stm32_uart_pdata * pd)122 static void register_non_secure_uart(struct stm32_uart_pdata *pd)
123 {
124 	size_t n = 0;
125 
126 	stm32mp_register_non_secure_periph_iomem(pd->base.pa);
127 	for (n = 0; n < pd->pinctrl_count; n++)
128 		stm32mp_register_non_secure_gpio(pd->pinctrl[n].bank,
129 						 pd->pinctrl[n].pin);
130 }
131 
stm32_uart_init_from_dt_node(void * fdt,int node)132 struct stm32_uart_pdata *stm32_uart_init_from_dt_node(void *fdt, int node)
133 {
134 	TEE_Result res = TEE_ERROR_GENERIC;
135 	struct stm32_uart_pdata *pd = NULL;
136 	struct dt_node_info info = { };
137 	struct stm32_pinctrl *pinctrl_cfg = NULL;
138 	int count = 0;
139 
140 	_fdt_fill_device_info(fdt, &info, node);
141 
142 	if (info.status == DT_STATUS_DISABLED)
143 		return NULL;
144 
145 	assert(info.reg != DT_INFO_INVALID_REG &&
146 	       info.reg_size != DT_INFO_INVALID_REG_SIZE);
147 
148 	pd = calloc(1, sizeof(*pd));
149 	if (!pd)
150 		panic();
151 
152 	pd->chip.ops = &stm32_uart_serial_ops;
153 	pd->base.pa = info.reg;
154 	pd->secure = (info.status == DT_STATUS_OK_SEC);
155 
156 	res = clk_dt_get_by_index(fdt, node, 0, &pd->clock);
157 	if (res) {
158 		EMSG("Failed to get clock: %#"PRIx32, res);
159 		panic();
160 	}
161 
162 	res = clk_enable(pd->clock);
163 	if (res)
164 		panic();
165 
166 	assert(cpu_mmu_enabled());
167 	pd->base.va = (vaddr_t)phys_to_virt(pd->base.pa,
168 					    pd->secure ? MEM_AREA_IO_SEC :
169 					    MEM_AREA_IO_NSEC, info.reg_size);
170 
171 	count = stm32_pinctrl_fdt_get_pinctrl(fdt, node, NULL, 0);
172 	if (count < 0)
173 		panic();
174 
175 	if (count) {
176 		pinctrl_cfg = calloc(count, sizeof(*pinctrl_cfg));
177 		if (!pinctrl_cfg)
178 			panic();
179 
180 		stm32_pinctrl_fdt_get_pinctrl(fdt, node, pinctrl_cfg, count);
181 		stm32_pinctrl_load_active_cfg(pinctrl_cfg, count);
182 	}
183 	pd->pinctrl = pinctrl_cfg;
184 	pd->pinctrl_count = count;
185 
186 	if (pd->secure)
187 		register_secure_uart(pd);
188 	else
189 		register_non_secure_uart(pd);
190 
191 	return pd;
192 }
193 #endif /*CFG_DT*/
194