1 /*
2  * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 
7 #ifndef PLATFORM_DEF_H
8 #define PLATFORM_DEF_H
9 
10 #include <arch.h>
11 #include <common/tbbr/tbbr_img_def.h>
12 #include <plat/common/common_def.h>
13 
14 #define PLATFORM_STACK_SIZE		0x1000
15 
16 #define PLATFORM_MAX_CPUS_PER_CLUSTER	U(2)
17 #define PLATFORM_CLUSTER_COUNT		U(1)
18 #define PLATFORM_CLUSTER0_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
19 #define PLATFORM_CLUSTER1_CORE_COUNT	U(0)
20 
21 #define PLATFORM_CORE_COUNT		(PLATFORM_CLUSTER0_CORE_COUNT + \
22 					 PLATFORM_CLUSTER1_CORE_COUNT)
23 
24 #define WARP7_PRIMARY_CPU		U(0)
25 
26 #define PLAT_NUM_PWR_DOMAINS		(PLATFORM_CLUSTER_COUNT + \
27 					PLATFORM_CORE_COUNT)
28 #define PLAT_MAX_PWR_LVL		MPIDR_AFFLVL1
29 
30 #define PLAT_MAX_RET_STATE		1
31 #define PLAT_MAX_OFF_STATE		2
32 
33 /* Local power state for power domains in Run state. */
34 #define PLAT_LOCAL_STATE_RUN		0
35 
36 /* Local power state for retention. Valid only for CPU power domains */
37 #define PLAT_LOCAL_STATE_RET		1
38 
39 /*
40  * Local power state for OFF/power-down. Valid for CPU and cluster power
41  * domains.
42  */
43 #define PLAT_LOCAL_STATE_OFF		2
44 
45 /*
46  * Macros used to parse state information from State-ID if it is using the
47  * recommended encoding for State-ID.
48  */
49 #define PLAT_LOCAL_PSTATE_WIDTH		4
50 #define PLAT_LOCAL_PSTATE_MASK		((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1)
51 
52 /*
53  * Some data must be aligned on the biggest cache line size in the platform.
54  * This is known only to the platform as it might have a combination of
55  * integrated and external caches.
56  * i.MX7 has a 32 byte cacheline size
57  * i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1, 08/2016 pg 244
58  */
59 #define CACHE_WRITEBACK_SHIFT		4
60 #define CACHE_WRITEBACK_GRANULE		(1 << CACHE_WRITEBACK_SHIFT)
61 
62 /*
63  * Partition memory into secure BootROM, OCRAM_S, non-secure DRAM, secure DRAM
64  */
65 #define BOOT_ROM_BASE			0x00000000
66 #define BOOT_ROM_SIZE			0x00020000
67 
68 #define OCRAM_S_BASE			0x00180000
69 #define OCRAM_S_SIZE			0x00008000
70 
71 /* Controller maps 2GB, board contains 512 MB. 0x80000000 - 0xa0000000 */
72 #define DRAM_BASE			0x80000000
73 #define DRAM_SIZE			0x20000000
74 #define DRAM_LIMIT			(DRAM_BASE + DRAM_SIZE)
75 
76 /* Place OPTEE at minus 32 MB from the end of memory. 0x9e000000 - 0xa0000000 */
77 #define IMX7_OPTEE_SIZE			0x02000000
78 #define IMX7_OPTEE_BASE			(DRAM_LIMIT - IMX7_OPTEE_SIZE)
79 #define IMX7_OPTEE_LIMIT		(IMX7_OPTEE_BASE + IMX7_OPTEE_SIZE)
80 
81 /* Place ATF directly beneath OPTEE. 0x9df00000 - 0x9e000000 */
82 #define BL2_RAM_SIZE			0x00100000
83 #define BL2_RAM_BASE			(IMX7_OPTEE_BASE - BL2_RAM_SIZE)
84 #define BL2_RAM_LIMIT			(BL2_RAM_BASE + BL2_RAM_SIZE)
85 
86 /* Optional Mailbox. Only relevant on i.MX7D. 0x9deff000 - 0x9df00000*/
87 #define SHARED_RAM_SIZE			0x00001000
88 #define SHARED_RAM_BASE			(BL2_RAM_BASE - SHARED_RAM_SIZE)
89 #define SHARED_RAM_LIMIT		(SHARED_RAM_BASE + SHARED_RAM_SIZE)
90 
91 /* Define the absolute location of u-boot 0x87800000 - 0x87900000 */
92 #define IMX7_UBOOT_SIZE			0x00100000
93 #define IMX7_UBOOT_BASE			(DRAM_BASE + 0x7800000)
94 #define IMX7_UBOOT_LIMIT		(IMX7_UBOOT_BASE + IMX7_UBOOT_SIZE)
95 
96 /* Define FIP image absolute location 0x80000000 - 0x80100000 */
97 #define IMX7_FIP_SIZE			0x00100000
98 #define IMX7_FIP_BASE			(DRAM_BASE)
99 #define IMX7_FIP_LIMIT			(IMX7_FIP_BASE + IMX7_FIP_SIZE)
100 
101 /* Define FIP image location at 1MB offset */
102 #define IMX7_FIP_MMC_BASE		(1024 * 1024)
103 
104 /* Define the absolute location of DTB 0x83000000 - 0x83100000 */
105 #define IMX7_DTB_SIZE			0x00100000
106 #define IMX7_DTB_BASE			(DRAM_BASE + 0x03000000)
107 #define IMX7_DTB_LIMIT			(IMX7_DTB_BASE + IMX7_DTB_SIZE)
108 
109 /* Define the absolute location of DTB Overlay 0x83100000 - 0x83101000 */
110 #define IMX7_DTB_OVERLAY_SIZE		0x00001000
111 #define IMX7_DTB_OVERLAY_BASE		IMX7_DTB_LIMIT
112 #define IMX7_DTB_OVERLAY_LIMIT		(IMX7_DTB_OVERLAY_BASE + \
113 					 IMX7_DTB_OVERLAY_SIZE)
114 
115 /*
116  * BL2 specific defines.
117  *
118  * Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
119  * size plus a little space for growth.
120  */
121 #define BL2_BASE		BL2_RAM_BASE
122 #define BL2_LIMIT		(BL2_RAM_BASE + BL2_RAM_SIZE)
123 
124 /*
125  * BL3-2/OPTEE
126  */
127 # define BL32_BASE		IMX7_OPTEE_BASE
128 # define BL32_LIMIT		(IMX7_OPTEE_BASE + IMX7_OPTEE_SIZE)
129 
130 /*
131  * BL3-3/U-BOOT
132  */
133 #define BL33_BASE		IMX7_UBOOT_BASE
134 #define BL33_LIMIT		(IMX7_UBOOT_BASE + IMX7_UBOOT_SIZE)
135 
136 /*
137  * ATF's view of memory
138  *
139  * 0xa0000000 +-----------------+
140  *            |       DDR       | BL32/OPTEE
141  * 0x9e000000 +-----------------+
142  *            |       DDR       | BL23 ATF
143  * 0x9df00000 +-----------------+
144  *            |       DDR       | Shared MBOX RAM
145  * 0x9de00000 +-----------------+
146  *            |       DDR       | Unallocated
147  * 0x87900000 +-----------------+
148  *            |       DDR       | BL33/U-BOOT
149  * 0x87800000 +-----------------+
150  *            |       DDR       | Unallocated
151  * 0x83101000 +-----------------+
152  *            |       DDR       | DTB Overlay
153  * 0x83100000 +-----------------+
154  *            |       DDR       | DTB
155  * 0x83000000 +-----------------+
156  *            |       DDR       | Unallocated
157  * 0x80100000 +-----------------+
158  *            |       DDR       | FIP
159  * 0x80000000 +-----------------+
160  *            |     SOC I/0     |
161  * 0x00a00000 +-----------------+
162  *            |      OCRAM      | Not used
163  * 0x00900000 +-----------------+
164  *            |     SOC I/0     |
165  * 0x00188000 +-----------------+
166  *            |     OCRAM_S     | Not used
167  * 0x00180000 +-----------------+
168  *            |     SOC I/0     |
169  * 0x00020000 +-----------------+
170  *            |     BootROM     | BL1
171  * 0x00000000 +-----------------+
172  */
173 
174 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
175 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
176 #define MAX_MMAP_REGIONS		10
177 #define MAX_XLAT_TABLES			6
178 #define MAX_IO_DEVICES			2
179 #define MAX_IO_HANDLES			3
180 #define MAX_IO_BLOCK_DEVICES		1U
181 
182 /* UART defines */
183 #if PLAT_WARP7_UART == 1
184 #define PLAT_WARP7_UART_BASE		MXC_UART1_BASE
185 #elif PLAT_WARP7_UART == 6
186 #define IMX_UART_DTE
187 #define PLAT_WARP7_UART_BASE		MXC_UART6_BASE
188 #else
189 #error "define PLAT_WARP7_UART=1 or PLAT_WARP7_UART=6"
190 #endif
191 
192 #define PLAT_IMX7_BOOT_UART_BASE	PLAT_WARP7_UART_BASE
193 #define PLAT_IMX7_BOOT_UART_CLK_IN_HZ	24000000
194 #define PLAT_IMX7_CONSOLE_BAUDRATE	115200
195 
196 /* MMC defines */
197 #ifndef PLAT_WARP7_SD
198 #define PLAT_WARP7_SD 3
199 #endif
200 
201 #if PLAT_WARP7_SD == 1
202 #define PLAT_WARP7_BOOT_MMC_BASE	USDHC1_BASE
203 #endif /* PLAT_WARP7_SD == 1 */
204 
205 #if PLAT_WARP7_SD == 2
206 #define PLAT_WARP7_BOOT_MMC_BASE	USDHC2_BASE
207 #endif /* PLAT_WARP7_SD == 2 */
208 
209 #if PLAT_WARP7_SD == 3
210 #define PLAT_WARP7_BOOT_MMC_BASE	USDHC3_BASE
211 #endif /* PLAT_WARP7_SD == 3 */
212 
213 /*
214  * System counter
215  */
216 #define SYS_COUNTER_FREQ_IN_TICKS	8000000		/* 8 MHz */
217 
218 #endif /* PLATFORM_DEF_H */
219