1 /* 2 * Copyright 2018-2021 NXP 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 * 6 */ 7 8 #ifndef PLAT_DEF_H 9 #define PLAT_DEF_H 10 11 #include <arch.h> 12 #include <cortex_a72.h> 13 /* Required without TBBR. 14 * To include the defines for DDR PHY 15 * Images. 16 */ 17 #include <tbbr_img_def.h> 18 19 #include <policy.h> 20 #include <soc.h> 21 22 #if defined(IMAGE_BL31) 23 #define LS_SYS_TIMCTL_BASE 0x2890000 24 #define PLAT_LS_NSTIMER_FRAME_ID 0 25 #define LS_CONFIG_CNTACR 1 26 #endif 27 28 #define NXP_SYSCLK_FREQ 100000000 29 #define NXP_DDRCLK_FREQ 100000000 30 31 /* UART related definition */ 32 #define NXP_CONSOLE_ADDR NXP_UART_ADDR 33 #define NXP_CONSOLE_BAUDRATE 115200 34 35 /* Size of cacheable stacks */ 36 #if defined(IMAGE_BL2) 37 #if defined(TRUSTED_BOARD_BOOT) 38 #define PLATFORM_STACK_SIZE 0x2000 39 #else 40 #define PLATFORM_STACK_SIZE 0x1000 41 #endif 42 #elif defined(IMAGE_BL31) 43 #define PLATFORM_STACK_SIZE 0x1000 44 #endif 45 46 /* SD block buffer */ 47 #define NXP_SD_BLOCK_BUF_SIZE (0x8000) 48 #define NXP_SD_BLOCK_BUF_ADDR (NXP_OCRAM_ADDR + NXP_OCRAM_SIZE \ 49 - NXP_SD_BLOCK_BUF_SIZE) 50 51 #ifdef SD_BOOT 52 #define BL2_LIMIT (NXP_OCRAM_ADDR + NXP_OCRAM_SIZE \ 53 - NXP_SD_BLOCK_BUF_SIZE) 54 #else 55 #define BL2_LIMIT (NXP_OCRAM_ADDR + NXP_OCRAM_SIZE) 56 #endif 57 58 /* IO defines as needed by IO driver framework */ 59 #define MAX_IO_DEVICES 4 60 #define MAX_IO_BLOCK_DEVICES 1 61 #define MAX_IO_HANDLES 4 62 63 #define PHY_GEN2_FW_IMAGE_BUFFER (NXP_OCRAM_ADDR + CSF_HDR_SZ) 64 65 /* 66 * FIP image defines - Offset at which FIP Image would be present 67 * Image would include Bl31 , Bl33 and Bl32 (optional) 68 */ 69 #ifdef POLICY_FUSE_PROVISION 70 #define MAX_FIP_DEVICES 3 71 #endif 72 73 #ifndef MAX_FIP_DEVICES 74 #define MAX_FIP_DEVICES 2 75 #endif 76 77 /* 78 * ID of the secure physical generic timer interrupt used by the BL32. 79 */ 80 #define BL32_IRQ_SEC_PHY_TIMER 29 81 82 #define BL31_WDOG_SEC 89 83 84 #define BL31_NS_WDOG_WS1 108 85 86 /* 87 * Define properties of Group 1 Secure and Group 0 interrupts as per GICv3 88 * terminology. On a GICv2 system or mode, the lists will be merged and treated 89 * as Group 0 interrupts. 90 */ 91 #define PLAT_LS_G1S_IRQ_PROPS(grp) \ 92 INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \ 93 GIC_INTR_CFG_EDGE) 94 95 /* SGI 15 and Secure watchdog interrupts assigned to Group 0 */ 96 #define NXP_IRQ_SEC_SGI_7 15 97 98 #define PLAT_LS_G0_IRQ_PROPS(grp) \ 99 INTR_PROP_DESC(BL31_WDOG_SEC, GIC_HIGHEST_SEC_PRIORITY, grp, \ 100 GIC_INTR_CFG_EDGE), \ 101 INTR_PROP_DESC(BL31_NS_WDOG_WS1, GIC_HIGHEST_SEC_PRIORITY, grp, \ 102 GIC_INTR_CFG_EDGE), \ 103 INTR_PROP_DESC(NXP_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, grp, \ 104 GIC_INTR_CFG_LEVEL) 105 #endif 106