• Home
  • Annotate
  • current directory
Name Date Size #Lines LOC

..18-Mar-2022-

Makefile A D18-Mar-20221.2 KiB6244

README A D18-Mar-20222.4 KiB6651

byte_swap.c A D18-Mar-20222.4 KiB11485

create_pbl.c A D18-Mar-202227.1 KiB997813

create_pbl.mk A D18-Mar-2022880 5336

pbl_ch2.mk A D18-Mar-20222.2 KiB6141

pbl_ch3.mk A D18-Mar-20222.7 KiB7242

README

1Description:
2------------
3Tool 'create_pbl' is a standalone tool to create the PBL images.
4	 where,
5	     On the basis of Chassis,
6	     RCW image is placed first followed by the,
7	     PBI commands to copy the,
8	     Input BL2 image stored on the,
9	     Specified boot source (QSPI or SD or NOR) to the,
10             Specified destination address.
11
12
13Usage in standalone way:
14-----------------------
15
16./create_pbl [options] (mentioned below):
17
18	-r  <RCW file-name>         - name of RCW binary file.
19	-i  <BL2 Bin file-name>     - file to be added to rcw file.
20	-c  <SoC Number>            - SoC numeric identifier, may be one of
21                                  1012,1023,1026.1028,
22                                  1043,1046,1088,2080,
23                                  2088,2160
24	-b  <boot source id>        - Boot source id string, may be one of
25                                  "qspi", "nor", "nand", "sd", "emmc"
26	-d  <Address>               - Destination address where BL2
27	                              image is to be copied
28	-o  <output filename>	    - Name of PBL image generated
29	                              as an output of the tool.
30	-e  <Address>               - [Optional] Entry Point Address
31	                              of the BL2.bin
32	-f  <Address>               - BL2 image offset
33	                              on Boot Source for block copy.
34	                              command for chassis >=3.)
35				      (Must for Ch3, Ignored for Ch2)
36	-h  Help.
37	-s  Secure boot.
38
39		-s 	secure boot
40		-c	SoC Number (see description above)
41		-b	Boot source.
42		-r	RCW binary file.
43		-i	Input file that is to be added to rcw file.
44		-o	Name of output file
45		-f	Source Offset (Block Copy)
46		-d	Destination address to which file has to be copied
47		-h	Help.
48
49Example:
50	./create_pbl -r <RCW file> -i <bl2.bin> -c <chassis_no> -b <boot_source = sd/qspi/nor> -d <Destination_Addr> -o <pbl_image_name>
51
52
53
54Usage at compilation time:
55--------------------------------
56
57	make <compilation command......> pbl RCW=<Path_to_RCW_File>/<rcw_file_name.bin>
58
59Example: QSPI Boot For LS1046ARDB-
60
61	make PLAT=ls1046rdb all fip BOOT_MODE=qspi SPD=opteed BL32=tee.bin BL33=u-boot-ls1046.bin pbl RCW=/home/pankaj/flexbuild/packages/firmware/dash-rcw/ls1046ardb/RR_FFSSPPPN_1133_5506/rcw_1600_qspiboot.bin
62
63Example: QSPI Boot For LX2160ARDB-
64
65	make PLAT=lx2160ardb all fip BOOT_MODE=flexspi_nor SPD=opteed BL32=tee_lx2.bin BL33=u-boot_lx2160.bin pbl RCW=plat/nxp/soc-lx2160/lx2160ardb/rcw_1900_600_1600_19_5_2.bin
66