1/*
2 * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
3 *
4 *  Copyright (C) 2012 Atmel,
5 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
6 *
7 * Licensed under GPLv2 or later.
8 */
9/dts-v1/;
10#include "at91sam9g25.dtsi"
11#include "at91sam9x5ek.dtsi"
12
13/ {
14	model = "Atmel AT91SAM9G25-EK";
15	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
16
17	ahb {
18		apb {
19			spi0: spi@f0000000 {
20				status = "disabled";
21			};
22
23			mmc1: mmc@f000c000 {
24				status = "disabled";
25			};
26
27			i2c0: i2c@f8010000 {
28				ov2640: camera@30 {
29					compatible = "ovti,ov2640";
30					reg = <0x30>;
31					pinctrl-names = "default";
32					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
33					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
34					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
35					clocks = <&pck0>;
36					clock-names = "xvclk";
37					assigned-clocks = <&pck0>;
38					assigned-clock-rates = <25000000>;
39					status = "okay";
40
41					port {
42						ov2640_0: endpoint {
43							remote-endpoint = <&isi_0>;
44							bus-width = <8>;
45						};
46					};
47				};
48			};
49
50			macb0: ethernet@f802c000 {
51				phy-mode = "rmii";
52				status = "okay";
53			};
54
55			isi: isi@f8048000 {
56				status = "okay";
57				port {
58					isi_0: endpoint@0 {
59						reg = <0>;
60						remote-endpoint = <&ov2640_0>;
61						bus-width = <8>;
62						vsync-active = <1>;
63						hsync-active = <1>;
64					};
65				};
66			};
67		};
68	};
69};
70