1/*
2 * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43#include <dt-bindings/pinctrl/stm32-pinfunc.h>
44
45/ {
46	soc {
47		pinctrl: pin-controller {
48			#address-cells = <1>;
49			#size-cells = <1>;
50			compatible = "st,stm32h743-pinctrl";
51			ranges = <0 0x58020000 0x3000>;
52			interrupt-parent = <&exti>;
53			st,syscfg = <&syscfg 0x8>;
54			pins-are-numbered;
55
56			gpioa: gpio@58020000 {
57				gpio-controller;
58				#gpio-cells = <2>;
59				reg = <0x0 0x400>;
60				clocks = <&rcc GPIOA_CK>;
61				st,bank-name = "GPIOA";
62				interrupt-controller;
63				#interrupt-cells = <2>;
64			};
65
66			gpiob: gpio@58020400 {
67				gpio-controller;
68				#gpio-cells = <2>;
69				reg = <0x400 0x400>;
70				clocks = <&rcc GPIOB_CK>;
71				st,bank-name = "GPIOB";
72				interrupt-controller;
73				#interrupt-cells = <2>;
74			};
75
76			gpioc: gpio@58020800 {
77				gpio-controller;
78				#gpio-cells = <2>;
79				reg = <0x800 0x400>;
80				clocks = <&rcc GPIOC_CK>;
81				st,bank-name = "GPIOC";
82				interrupt-controller;
83				#interrupt-cells = <2>;
84			};
85
86			gpiod: gpio@58020c00 {
87				gpio-controller;
88				#gpio-cells = <2>;
89				reg = <0xc00 0x400>;
90				clocks = <&rcc GPIOD_CK>;
91				st,bank-name = "GPIOD";
92				interrupt-controller;
93				#interrupt-cells = <2>;
94			};
95
96			gpioe: gpio@58021000 {
97				gpio-controller;
98				#gpio-cells = <2>;
99				reg = <0x1000 0x400>;
100				clocks = <&rcc GPIOE_CK>;
101				st,bank-name = "GPIOE";
102				interrupt-controller;
103				#interrupt-cells = <2>;
104			};
105
106			gpiof: gpio@58021400 {
107				gpio-controller;
108				#gpio-cells = <2>;
109				reg = <0x1400 0x400>;
110				clocks = <&rcc GPIOF_CK>;
111				st,bank-name = "GPIOF";
112				interrupt-controller;
113				#interrupt-cells = <2>;
114			};
115
116			gpiog: gpio@58021800 {
117				gpio-controller;
118				#gpio-cells = <2>;
119				reg = <0x1800 0x400>;
120				clocks = <&rcc GPIOG_CK>;
121				st,bank-name = "GPIOG";
122				interrupt-controller;
123				#interrupt-cells = <2>;
124			};
125
126			gpioh: gpio@58021c00 {
127				gpio-controller;
128				#gpio-cells = <2>;
129				reg = <0x1c00 0x400>;
130				clocks = <&rcc GPIOH_CK>;
131				st,bank-name = "GPIOH";
132				interrupt-controller;
133				#interrupt-cells = <2>;
134			};
135
136			gpioi: gpio@58022000 {
137				gpio-controller;
138				#gpio-cells = <2>;
139				reg = <0x2000 0x400>;
140				clocks = <&rcc GPIOI_CK>;
141				st,bank-name = "GPIOI";
142				interrupt-controller;
143				#interrupt-cells = <2>;
144			};
145
146			gpioj: gpio@58022400 {
147				gpio-controller;
148				#gpio-cells = <2>;
149				reg = <0x2400 0x400>;
150				clocks = <&rcc GPIOJ_CK>;
151				st,bank-name = "GPIOJ";
152				interrupt-controller;
153				#interrupt-cells = <2>;
154			};
155
156			gpiok: gpio@58022800 {
157				gpio-controller;
158				#gpio-cells = <2>;
159				reg = <0x2800 0x400>;
160				clocks = <&rcc GPIOK_CK>;
161				st,bank-name = "GPIOK";
162				interrupt-controller;
163				#interrupt-cells = <2>;
164			};
165
166			i2c1_pins_a: i2c1-0 {
167				pins {
168					pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
169						 <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
170					bias-disable;
171					drive-open-drain;
172					slew-rate = <0>;
173				};
174			};
175
176			ethernet_rmii: rmii-0 {
177				pins {
178					pinmux = <STM32_PINMUX('G', 11, AF11)>,
179						 <STM32_PINMUX('G', 13, AF11)>,
180						 <STM32_PINMUX('G', 12, AF11)>,
181						 <STM32_PINMUX('C', 4, AF11)>,
182						 <STM32_PINMUX('C', 5, AF11)>,
183						 <STM32_PINMUX('A', 7, AF11)>,
184						 <STM32_PINMUX('C', 1, AF11)>,
185						 <STM32_PINMUX('A', 2, AF11)>,
186						 <STM32_PINMUX('A', 1, AF11)>;
187					slew-rate = <2>;
188				};
189			};
190
191			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
192				pins {
193					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
194						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
195						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
196						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
197						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
198						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
199					slew-rate = <3>;
200					drive-push-pull;
201					bias-disable;
202				};
203			};
204
205			sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
206				pins1 {
207					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
208						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
209						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
210						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
211						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
212					slew-rate = <3>;
213					drive-push-pull;
214					bias-disable;
215				};
216				pins2{
217					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
218					slew-rate = <3>;
219					drive-open-drain;
220					bias-disable;
221				};
222			};
223
224			sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
225				pins {
226					pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
227						 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
228						 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
229						 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
230						 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
231						 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
232				};
233			};
234
235			sdmmc1_dir_pins_a: sdmmc1-dir-0 {
236				pins1 {
237					pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
238						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
239						 <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
240					slew-rate = <3>;
241					drive-push-pull;
242					bias-pull-up;
243				};
244				pins2{
245					pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
246					bias-pull-up;
247				};
248			};
249
250			sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
251				pins {
252					pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
253						 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
254						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
255						 <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
256				};
257			};
258
259			usart1_pins: usart1-0 {
260				pins1 {
261					pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
262					bias-disable;
263					drive-push-pull;
264					slew-rate = <0>;
265				};
266				pins2 {
267					pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
268					bias-disable;
269				};
270			};
271
272			usart2_pins: usart2-0 {
273				pins1 {
274					pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
275					bias-disable;
276					drive-push-pull;
277					slew-rate = <0>;
278				};
279				pins2 {
280					pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
281					bias-disable;
282				};
283			};
284
285			usbotg_hs_pins_a: usbotg-hs-0 {
286				pins {
287					pinmux = <STM32_PINMUX('H', 4, AF10)>,	/* ULPI_NXT */
288							 <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
289							 <STM32_PINMUX('C', 0, AF10)>,	/* ULPI_STP> */
290							 <STM32_PINMUX('A', 5, AF10)>,	/* ULPI_CK> */
291							 <STM32_PINMUX('A', 3, AF10)>,	/* ULPI_D0> */
292							 <STM32_PINMUX('B', 0, AF10)>,	/* ULPI_D1> */
293							 <STM32_PINMUX('B', 1, AF10)>,	/* ULPI_D2> */
294							 <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
295							 <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
296							 <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
297							 <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
298							 <STM32_PINMUX('B', 5, AF10)>;	/* ULPI_D7> */
299					bias-disable;
300					drive-push-pull;
301					slew-rate = <2>;
302				};
303			};
304		};
305	};
306};
307