1/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47#include <dt-bindings/interrupt-controller/arm-gic.h>
48
49/ {
50	model = "LeMaker Banana Pro";
51	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
52
53	aliases {
54		serial0 = &uart0;
55		serial1 = &uart4;
56		serial2 = &uart7;
57	};
58
59	chosen {
60		stdout-path = "serial0:115200n8";
61	};
62
63	leds {
64		compatible = "gpio-leds";
65
66		blue {
67			label = "bananapro:blue:usr";
68			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
69		};
70
71		green {
72			label = "bananapro:green:usr";
73			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
74		};
75	};
76
77	wifi_pwrseq: wifi-pwrseq {
78		compatible = "mmc-pwrseq-simple";
79		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
80	};
81
82	reg_gmac_3v3: gmac-3v3 {
83		compatible = "regulator-fixed";
84		regulator-name = "gmac-3v3";
85		regulator-min-microvolt = <3300000>;
86		regulator-max-microvolt = <3300000>;
87		startup-delay-us = <100000>;
88		enable-active-high;
89		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
90	};
91};
92
93&ahci {
94	status = "okay";
95};
96
97&codec {
98	status = "okay";
99};
100
101&ehci0 {
102	status = "okay";
103};
104
105&ehci1 {
106	status = "okay";
107};
108
109&gmac {
110	pinctrl-names = "default";
111	pinctrl-0 = <&gmac_rgmii_pins>;
112	phy = <&phy1>;
113	phy-mode = "rgmii";
114	phy-supply = <&reg_gmac_3v3>;
115	status = "okay";
116
117	phy1: ethernet-phy@1 {
118		reg = <1>;
119	};
120};
121
122&i2c0 {
123	status = "okay";
124
125	axp209: pmic@34 {
126		compatible = "x-powers,axp209";
127		reg = <0x34>;
128		interrupt-parent = <&nmi_intc>;
129		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
130
131		interrupt-controller;
132		#interrupt-cells = <1>;
133	};
134};
135
136&i2c2 {
137	status = "okay";
138};
139
140&ir0 {
141	pinctrl-names = "default";
142	pinctrl-0 = <&ir0_rx_pin>;
143	status = "okay";
144};
145
146&mmc0 {
147	vmmc-supply = <&reg_vcc3v3>;
148	bus-width = <4>;
149	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
150	status = "okay";
151};
152
153&mmc3 {
154	vmmc-supply = <&reg_vcc3v3>;
155	mmc-pwrseq = <&wifi_pwrseq>;
156	bus-width = <4>;
157	non-removable;
158	status = "okay";
159
160	brcmf: wifi@1 {
161		reg = <1>;
162		compatible = "brcm,bcm4329-fmac";
163		interrupt-parent = <&pio>;
164		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
165		interrupt-names = "host-wake";
166	};
167};
168
169&ohci0 {
170	status = "okay";
171};
172
173&ohci1 {
174	status = "okay";
175};
176
177&reg_usb1_vbus {
178	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
179	status = "okay";
180};
181
182&reg_usb2_vbus {
183	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
184	status = "okay";
185};
186
187&spi0 {
188	pinctrl-names = "default";
189	pinctrl-0 = <&spi0_pi_pins>,
190		    <&spi0_cs0_pi_pin>,
191		    <&spi0_cs1_pi_pin>;
192	status = "okay";
193};
194
195&uart0 {
196	pinctrl-names = "default";
197	pinctrl-0 = <&uart0_pb_pins>;
198	status = "okay";
199};
200
201&uart4 {
202	pinctrl-names = "default";
203	pinctrl-0 = <&uart4_ph_pins>;
204	status = "okay";
205};
206
207&uart7 {
208	pinctrl-names = "default";
209	pinctrl-0 = <&uart7_pi_pins>;
210	status = "okay";
211};
212
213&usbphy {
214	usb1_vbus-supply = <&reg_usb1_vbus>;
215	usb2_vbus-supply = <&reg_usb2_vbus>;
216	status = "okay";
217};
218