1// SPDX-License-Identifier: GPL-2.0+ OR X11 2/* 3 * (C) Copyright 2018 4 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de. 5 * 6 * Copyright 2016 Toradex AG 7 */ 8 9/dts-v1/; 10#include "vf610-pcm052.dtsi" 11#include "vf610-pinfunc.h" 12 13/ { 14 model = "Liebherr (LVF) BK4 Vybrid Board"; 15 compatible = "lvf,bk4", "fsl,vf610"; 16 17 leds { 18 pinctrl-names = "default"; 19 pinctrl-0 = <&pinctrl_gpio_leds>; 20 21 compatible = "gpio-leds"; 22 23 /* PTE15 PORT3[24] H6 green */ 24 led@0 { 25 label = "0"; 26 gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 27 default-state = "off"; 28 }; 29 30 /* PTA12 PORT0[5] H5 green */ 31 led@1 { 32 label = "1"; 33 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; 34 default-state = "off"; 35 }; 36 37 /* PTE20 PORT3[39] H4 green */ 38 led@2 { 39 label = "2"; 40 gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; 41 default-state = "off"; 42 }; 43 44 /* PTE12 PORT3[21] H3 green */ 45 led@3 { 46 label = "3"; 47 gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; 48 default-state = "off"; 49 }; 50 51 /* LED6 is now PRESET ETH -> PTA16 PORT0[6] H6 red */ 52 /* PTE9 PORT3[18] H5 red */ 53 led@4 { 54 label = "5"; 55 gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; 56 default-state = "off"; 57 }; 58 59 /* PTE23 PORT4[0] H4 red */ 60 led@5 { 61 label = "6"; 62 gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; 63 default-state = "off"; 64 }; 65 66 /* PTE16 PORT3[25] H3 red */ 67 led@6 { 68 label = "7"; 69 gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; 70 default-state = "off"; 71 }; 72 }; 73}; 74 75&iomuxc { 76 pinctrl-0 = <&pinctrl_ddr &pinctrl_hog>; 77 78 pinctrl_hog: hoggrp { 79 fsl,pins = < 80 /* ETH control pins */ 81 VF610_PAD_PTE17__GPIO_122 0x1183 82 VF610_PAD_PTA16__GPIO_6 0x1183 83 >; 84 }; 85 86 pinctrl_gpio_leds: gpioledsgrp { 87 fsl,pins = < 88 /* LEDS */ 89 VF610_PAD_PTE15__GPIO_120 0x1183 90 VF610_PAD_PTA12__GPIO_5 0x1183 91 VF610_PAD_PTE9__GPIO_114 0x1183 92 VF610_PAD_PTE20__GPIO_125 0x1183 93 VF610_PAD_PTE23__GPIO_128 0x1183 94 VF610_PAD_PTE16__GPIO_121 0x1183 95 >; 96 }; 97}; 98