1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * dts file for Xilinx ZynqMP ZCU208 4 * 5 * (C) Copyright 2017 - 2020, Xilinx, Inc. 6 * 7 * Michal Simek <michal.simek@xilinx.com> 8 */ 9 10/dts-v1/; 11 12#include "zynqmp.dtsi" 13#include "zynqmp-clk-ccf.dtsi" 14#include <dt-bindings/input/input.h> 15#include <dt-bindings/gpio/gpio.h> 16#include <dt-bindings/phy/phy.h> 17 18/ { 19 model = "ZynqMP ZCU208 RevA"; 20 compatible = "xlnx,zynqmp-zcu208-revA", "xlnx,zynqmp-zcu208", "xlnx,zynqmp"; 21 22 aliases { 23 ethernet0 = &gem3; 24 gpio0 = &gpio; 25 i2c0 = &i2c0; 26 i2c1 = &i2c1; 27 mmc0 = &sdhci1; 28 rtc0 = &rtc; 29 serial0 = &uart0; 30 serial1 = &dcc; 31 spi0 = &qspi; 32 usb0 = &usb0; 33 }; 34 35 chosen { 36 bootargs = "earlycon"; 37 stdout-path = "serial0:115200n8"; 38 xlnx,eeprom = &eeprom; 39 }; 40 41 memory@0 { 42 device_type = "memory"; 43 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; 44 }; 45 46 gpio-keys { 47 compatible = "gpio-keys"; 48 autorepeat; 49 sw19 { 50 label = "sw19"; 51 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; 52 linux,code = <KEY_DOWN>; 53 wakeup-source; 54 autorepeat; 55 }; 56 }; 57 58 leds { 59 compatible = "gpio-leds"; 60 heartbeat_led { 61 label = "heartbeat"; 62 gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; 63 linux,default-trigger = "heartbeat"; 64 }; 65 }; 66 67 ina226-vccint { 68 compatible = "iio-hwmon"; 69 io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>; 70 }; 71 ina226-vccint-io-bram-ps { 72 compatible = "iio-hwmon"; 73 io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>; 74 }; 75 ina226-vcc1v8 { 76 compatible = "iio-hwmon"; 77 io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>; 78 }; 79 ina226-vcc1v2 { 80 compatible = "iio-hwmon"; 81 io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>; 82 }; 83 ina226-vadj-fmc { 84 compatible = "iio-hwmon"; 85 io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>; 86 }; 87 ina226-mgtavcc { 88 compatible = "iio-hwmon"; 89 io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>; 90 }; 91 ina226-mgt1v2 { 92 compatible = "iio-hwmon"; 93 io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>; 94 }; 95 ina226-mgt1v8 { 96 compatible = "iio-hwmon"; 97 io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>; 98 }; 99 ina226-vccint-ams { 100 compatible = "iio-hwmon"; 101 io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>; 102 }; 103 ina226-dac-avtt { 104 compatible = "iio-hwmon"; 105 io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>; 106 }; 107 ina226-dac-avccaux { 108 compatible = "iio-hwmon"; 109 io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>; 110 }; 111 ina226-adc-avcc { 112 compatible = "iio-hwmon"; 113 io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>; 114 }; 115 ina226-adc-avccaux { 116 compatible = "iio-hwmon"; 117 io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>; 118 }; 119 ina226-dac-avcc { 120 compatible = "iio-hwmon"; 121 io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>; 122 }; 123}; 124 125&dcc { 126 status = "okay"; 127}; 128 129&fpd_dma_chan1 { 130 status = "okay"; 131}; 132 133&fpd_dma_chan2 { 134 status = "okay"; 135}; 136 137&fpd_dma_chan3 { 138 status = "okay"; 139}; 140 141&fpd_dma_chan4 { 142 status = "okay"; 143}; 144 145&fpd_dma_chan5 { 146 status = "okay"; 147}; 148 149&fpd_dma_chan6 { 150 status = "okay"; 151}; 152 153&fpd_dma_chan7 { 154 status = "okay"; 155}; 156 157&fpd_dma_chan8 { 158 status = "okay"; 159}; 160 161&gem3 { 162 status = "okay"; 163 phy-handle = <&phy0>; 164 phy-mode = "rgmii-id"; 165 phy0: ethernet-phy@c { 166 reg = <0xc>; 167 ti,rx-internal-delay = <0x8>; 168 ti,tx-internal-delay = <0xa>; 169 ti,fifo-depth = <0x1>; 170 ti,dp83867-rxctrl-strap-quirk; 171 }; 172}; 173 174&gpio { 175 status = "okay"; 176 gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */ 177 "QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */ 178 "QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */ 179 "I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */ 180 "", "", "BUTTON", "LED", "", /* 20 - 24 */ 181 "", "PMU_INPUT", "", "", "", /* 25 - 29 */ 182 "", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */ 183 "PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */ 184 "SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "", "", /* 40 - 44 */ 185 "SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */ 186 "SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */ 187 "USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */ 188 "USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */ 189 "ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */ 190 "ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */ 191 "ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */ 192 "", "", /* 78 - 79 */ 193 "", "", "", "", "", /* 80 - 84 */ 194 "", "", "", "", "", /* 85 -89 */ 195 "", "", "", "", "", /* 90 - 94 */ 196 "", "", "", "", "", /* 95 - 99 */ 197 "", "", "", "", "", /* 100 - 104 */ 198 "", "", "", "", "", /* 105 - 109 */ 199 "", "", "", "", "", /* 110 - 114 */ 200 "", "", "", "", "", /* 115 - 119 */ 201 "", "", "", "", "", /* 120 - 124 */ 202 "", "", "", "", "", /* 125 - 129 */ 203 "", "", "", "", "", /* 130 - 134 */ 204 "", "", "", "", "", /* 135 - 139 */ 205 "", "", "", "", "", /* 140 - 144 */ 206 "", "", "", "", "", /* 145 - 149 */ 207 "", "", "", "", "", /* 150 - 154 */ 208 "", "", "", "", "", /* 155 - 159 */ 209 "", "", "", "", "", /* 160 - 164 */ 210 "", "", "", "", "", /* 165 - 169 */ 211 "", "", "", ""; /* 170 - 174 */ 212}; 213 214&i2c0 { 215 status = "okay"; 216 clock-frequency = <400000>; 217 218 tca6416_u15: gpio@20 { /* u15 */ 219 compatible = "ti,tca6416"; 220 reg = <0x20>; 221 gpio-controller; /* interrupt not connected */ 222 #gpio-cells = <2>; 223 gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "DAC_AVTT_VOUT_SEL", /* 0 - 3 */ 224 "", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */ 225 "FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */ 226 "", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */ 227 }; 228 229 i2c-mux@75 { /* u17 */ 230 compatible = "nxp,pca9544"; 231 #address-cells = <1>; 232 #size-cells = <0>; 233 reg = <0x75>; 234 i2c@0 { 235 #address-cells = <1>; 236 #size-cells = <0>; 237 reg = <0>; 238 /* PS_PMBUS */ 239 /* PMBUS_ALERT done via pca9544 */ 240 vccint: ina226@40 { /* u65 */ 241 compatible = "ti,ina226"; 242 #io-channel-cells = <1>; 243 label = "ina226-vccint"; 244 reg = <0x40>; 245 shunt-resistor = <5000>; 246 }; 247 vccint_io_bram_ps: ina226@41 { /* u57 */ 248 compatible = "ti,ina226"; 249 #io-channel-cells = <1>; 250 label = "ina226-vccint-io-bram-ps"; 251 reg = <0x41>; 252 shunt-resistor = <5000>; 253 }; 254 vcc1v8: ina226@42 { /* u60 */ 255 compatible = "ti,ina226"; 256 #io-channel-cells = <1>; 257 label = "ina226-vcc1v8"; 258 reg = <0x42>; 259 shunt-resistor = <2000>; 260 }; 261 vcc1v2: ina226@43 { /* u58 */ 262 compatible = "ti,ina226"; 263 #io-channel-cells = <1>; 264 label = "ina226-vcc1v2"; 265 reg = <0x43>; 266 shunt-resistor = <5000>; 267 }; 268 vadj_fmc: ina226@45 { /* u62 */ 269 compatible = "ti,ina226"; 270 #io-channel-cells = <1>; 271 label = "ina226-vadj-fmc"; 272 reg = <0x45>; 273 shunt-resistor = <5000>; 274 }; 275 mgtavcc: ina226@46 { /* u67 */ 276 compatible = "ti,ina226"; 277 #io-channel-cells = <1>; 278 label = "ina226-mgtavcc"; 279 reg = <0x46>; 280 shunt-resistor = <2000>; 281 }; 282 mgt1v2: ina226@47 { /* u63 */ 283 compatible = "ti,ina226"; 284 #io-channel-cells = <1>; 285 label = "ina226-mgt1v2"; 286 reg = <0x47>; 287 shunt-resistor = <5000>; 288 }; 289 mgt1v8: ina226@48 { /* u64 */ 290 compatible = "ti,ina226"; 291 #io-channel-cells = <1>; 292 label = "ina226-mgt1v8"; 293 reg = <0x48>; 294 shunt-resistor = <5000>; 295 }; 296 vccint_ams: ina226@49 { /* u61 */ 297 compatible = "ti,ina226"; 298 #io-channel-cells = <1>; 299 label = "ina226-vccint-ams"; 300 reg = <0x49>; 301 shunt-resistor = <5000>; 302 }; 303 dac_avtt: ina226@4a { /* u59 */ 304 compatible = "ti,ina226"; 305 #io-channel-cells = <1>; 306 label = "ina226-dac-avtt"; 307 reg = <0x4a>; 308 shunt-resistor = <5000>; 309 }; 310 dac_avccaux: ina226@4b { /* u124 */ 311 compatible = "ti,ina226"; 312 #io-channel-cells = <1>; 313 label = "ina226-dac-avccaux"; 314 reg = <0x4b>; 315 shunt-resistor = <5000>; 316 }; 317 adc_avcc: ina226@4c { /* u75 */ 318 compatible = "ti,ina226"; 319 #io-channel-cells = <1>; 320 label = "ina226-adc-avcc"; 321 reg = <0x4c>; 322 shunt-resistor = <5000>; 323 }; 324 adc_avccaux: ina226@4d { /* u71 */ 325 compatible = "ti,ina226"; 326 #io-channel-cells = <1>; 327 label = "ina226-adc-avccaux"; 328 reg = <0x4d>; 329 shunt-resistor = <5000>; 330 }; 331 dac_avcc: ina226@4e { /* u77 */ 332 compatible = "ti,ina226"; 333 #io-channel-cells = <1>; 334 label = "ina226-dac-avcc"; 335 reg = <0x4e>; 336 shunt-resistor = <5000>; 337 }; 338 }; 339 i2c@1 { 340 #address-cells = <1>; 341 #size-cells = <0>; 342 reg = <1>; 343 /* NC */ 344 }; 345 i2c@2 { 346 #address-cells = <1>; 347 #size-cells = <0>; 348 reg = <2>; 349 /* u104 - ir35215 0x10/0x40 */ 350 /* u127 - ir38164 0x1b/0x4b */ 351 /* u112 - ir38164 0x13/0x43 */ 352 /* u123 - ir38164 0x1c/0x4c */ 353 354 irps5401_44: irps5401@44 { /* IRPS5401 - u53 */ 355 compatible = "infineon,irps5401"; 356 reg = <0x44>; /* i2c addr 0x14 */ 357 }; 358 irps5401_45: irps5401@45 { /* IRPS5401 - u55 */ 359 compatible = "infineon,irps5401"; 360 reg = <0x45>; /* i2c addr 0x15 */ 361 }; 362 /* J21 header too */ 363 364 }; 365 i2c@3 { 366 #address-cells = <1>; 367 #size-cells = <0>; 368 reg = <3>; 369 /* SYSMON */ 370 }; 371 }; 372 /* u38 MPS430 */ 373}; 374 375&i2c1 { 376 status = "okay"; 377 clock-frequency = <400000>; 378 379 i2c-mux@74 { 380 compatible = "nxp,pca9548"; /* u20 */ 381 #address-cells = <1>; 382 #size-cells = <0>; 383 reg = <0x74>; 384 /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ 385 i2c_eeprom: i2c@0 { 386 #address-cells = <1>; 387 #size-cells = <0>; 388 reg = <0>; 389 /* 390 * IIC_EEPROM 1kB memory which uses 256B blocks 391 * where every block has different address. 392 * 0 - 256B address 0x54 393 * 256B - 512B address 0x55 394 * 512B - 768B address 0x56 395 * 768B - 1024B address 0x57 396 */ 397 eeprom: eeprom@54 { /* u21 */ 398 compatible = "atmel,24c128"; 399 reg = <0x54>; 400 }; 401 }; 402 i2c_si5341: i2c@1 { 403 #address-cells = <1>; 404 #size-cells = <0>; 405 reg = <1>; 406 si5341: clock-generator@36 { /* SI5341 - u43 */ 407 compatible = "si5341"; 408 reg = <0x36>; 409 }; 410 411 }; 412 i2c_si570_user_c0: i2c@2 { 413 #address-cells = <1>; 414 #size-cells = <0>; 415 reg = <2>; 416 si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */ 417 #clock-cells = <0>; 418 compatible = "silabs,si570"; 419 reg = <0x5d>; 420 temperature-stability = <50>; 421 factory-fout = <300000000>; 422 clock-frequency = <300000000>; 423 clock-output-names = "si570_user_c0"; 424 }; 425 }; 426 i2c_si570_mgt: i2c@3 { 427 #address-cells = <1>; 428 #size-cells = <0>; 429 reg = <3>; 430 si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */ 431 #clock-cells = <0>; 432 compatible = "silabs,si570"; 433 reg = <0x5d>; 434 temperature-stability = <50>; 435 factory-fout = <156250000>; 436 clock-frequency = <148500000>; 437 clock-output-names = "si570_mgt"; 438 }; 439 }; 440 i2c_8a34001: i2c@4 { 441 #address-cells = <1>; 442 #size-cells = <0>; 443 reg = <4>; 444 /* U409B - 8a34001 */ 445 }; 446 i2c_clk104: i2c@5 { 447 #address-cells = <1>; 448 #size-cells = <0>; 449 reg = <5>; 450 /* CLK104_SDA */ 451 }; 452 i2c@6 { 453 #address-cells = <1>; 454 #size-cells = <0>; 455 reg = <6>; 456 /* RFMCP connector */ 457 }; 458 /* 7 NC */ 459 }; 460 461 i2c-mux@75 { 462 compatible = "nxp,pca9548"; /* u22 */ 463 #address-cells = <1>; 464 #size-cells = <0>; 465 reg = <0x75>; 466 /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ 467 i2c@0 { 468 #address-cells = <1>; 469 #size-cells = <0>; 470 reg = <0>; 471 /* FMCP_HSPC_IIC */ 472 }; 473 i2c_si570_user_c1: i2c@1 { 474 #address-cells = <1>; 475 #size-cells = <0>; 476 reg = <1>; 477 si570_3: clock-generator@5d { /* USER C1 SI570 - u130 */ 478 #clock-cells = <0>; 479 compatible = "silabs,si570"; 480 reg = <0x5d>; 481 temperature-stability = <50>; 482 factory-fout = <300000000>; 483 clock-frequency = <300000000>; 484 clock-output-names = "si570_user_c1"; 485 }; 486 }; 487 i2c@2 { 488 #address-cells = <1>; 489 #size-cells = <0>; 490 reg = <2>; 491 /* SYSMON */ 492 }; 493 i2c@3 { 494 #address-cells = <1>; 495 #size-cells = <0>; 496 reg = <3>; 497 /* DDR4 SODIMM */ 498 }; 499 i2c@4 { 500 #address-cells = <1>; 501 #size-cells = <0>; 502 reg = <4>; 503 /* SFP3 */ 504 }; 505 i2c@5 { 506 #address-cells = <1>; 507 #size-cells = <0>; 508 reg = <5>; 509 /* SFP2 */ 510 }; 511 i2c@6 { 512 #address-cells = <1>; 513 #size-cells = <0>; 514 reg = <6>; 515 /* SFP1 */ 516 }; 517 i2c@7 { 518 #address-cells = <1>; 519 #size-cells = <0>; 520 reg = <7>; 521 /* SFP0 */ 522 }; 523 }; 524 /* MSP430 */ 525}; 526 527&qspi { 528 status = "okay"; 529 is-dual = <1>; 530 flash@0 { 531 compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 1Gb */ 532 #address-cells = <1>; 533 #size-cells = <1>; 534 reg = <0>; 535 spi-tx-bus-width = <1>; 536 spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ 537 spi-max-frequency = <108000000>; /* Based on DC1 spec */ 538 }; 539}; 540 541&rtc { 542 status = "okay"; 543}; 544 545&sata { 546 status = "okay"; 547 /* SATA OOB timing settings */ 548 ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 549 ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 550 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 551 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 552 ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 553 ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 554 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 555 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 556 phy-names = "sata-phy"; 557 phys = <&lane3 PHY_TYPE_SATA 1 3 125000000>; 558}; 559 560/* SD1 with level shifter */ 561&sdhci1 { 562 status = "okay"; 563 disable-wp; 564 /* 565 * This property should be removed for supporting UHS mode 566 */ 567 no-1-8-v; 568 xlnx,mio-bank = <1>; 569}; 570 571&serdes { 572 status = "okay"; 573}; 574 575&uart0 { 576 status = "okay"; 577}; 578 579/* ULPI SMSC USB3320 */ 580&usb0 { 581 status = "okay"; 582}; 583 584&dwc3_0 { 585 status = "okay"; 586 dr_mode = "host"; 587 snps,usb3_lpm_capable; 588 phy-names = "usb3-phy"; 589 phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>; 590}; 591