1
2if SOC_MT7628
3
4choice
5	prompt "Board select"
6
7config BOARD_GARDENA_SMART_GATEWAY_MT7688
8	bool "GARDENA smart Gateway"
9	select BOARD_LATE_INIT
10	help
11	  GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
12	  and 8 MiB of flash (SPI NOR) and additional SPI NAND storage.
13
14config BOARD_LINKIT_SMART_7688
15	bool "LinkIt Smart 7688"
16	help
17	  Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
18	  and 32 MiB of flash (SPI).
19	  Between its different peripherals there's an integrated switch with 4
20	  ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
21	  a MT7688 (PCIe).
22
23config BOARD_MT7628_RFB
24	bool "MediaTek MT7628 RFB"
25	help
26	  The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB
27	  SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
28	  1 SDXC, 1 PCIe socket and JTAG pins.
29
30config BOARD_VOCORE2
31	bool "VoCore2"
32	select SPL_SERIAL_SUPPORT
33	select SPL_UART2_SPIS_PINMUX
34	help
35	  VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
36	  and 16 MiB of flash (SPI).
37
38endchoice
39
40config SPL_UART2_SPIS_PINMUX
41	bool "Use alternative pinmux for UART2 in SPL stage"
42	depends on SPL_SERIAL_SUPPORT
43	default n
44	help
45	  Select this if the UART2 of your board is connected to GPIO 16/17
46	  (shared with SPIS) rather than the usual GPIO 20/21.
47
48source "board/gardena/smart-gateway-mt7688/Kconfig"
49source "board/mediatek/mt7628/Kconfig"
50source "board/seeed/linkit-smart-7688/Kconfig"
51source "board/vocore/vocore2/Kconfig"
52
53endif
54