1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * From Coreboot file of same name
4  *
5  * Copyright (C) 2007-2009 coresystems GmbH
6  *               2012 secunet Security Networks AG
7  */
8 
9 #ifndef _ASM_SPEEDSTEP_H
10 #define _ASM_SPEEDSTEP_H
11 
12 /* Magic value used to locate speedstep configuration in the device tree */
13 #define SPEEDSTEP_APIC_MAGIC 0xACAC
14 
15 /* MWAIT coordination I/O base address. This must match
16  * the \_PR_.CPU0 PM base address.
17  */
18 #define PMB0_BASE 0x510
19 
20 /* PMB1: I/O port that triggers SMI once cores are in the same state.
21  * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4]
22  */
23 #define PMB1_BASE 0x800
24 
25 struct sst_state {
26 	uint8_t dynfsb:1; /* whether this is SLFM */
27 	uint8_t nonint:1; /* add .5 to ratio */
28 	uint8_t ratio:6;
29 	uint8_t vid;
30 	uint8_t is_turbo;
31 	uint8_t is_slfm;
32 	uint32_t power;
33 };
34 #define SPEEDSTEP_RATIO_SHIFT		8
35 #define SPEEDSTEP_RATIO_DYNFSB_SHIFT	(7 + SPEEDSTEP_RATIO_SHIFT)
36 #define SPEEDSTEP_RATIO_DYNFSB		(1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT)
37 #define SPEEDSTEP_RATIO_NONINT_SHIFT	(6 + SPEEDSTEP_RATIO_SHIFT)
38 #define SPEEDSTEP_RATIO_NONINT		(1 << SPEEDSTEP_RATIO_NONINT_SHIFT)
39 #define SPEEDSTEP_RATIO_VALUE_MASK	(0x1f << SPEEDSTEP_RATIO_SHIFT)
40 #define SPEEDSTEP_VID_MASK		0x3f
41 #define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){	\
42 		0, /* dynfsb won't be read. */				\
43 		((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0,	\
44 		(((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK)		\
45 					>> SPEEDSTEP_RATIO_SHIFT),	\
46 		(val & mask) & SPEEDSTEP_VID_MASK,			\
47 		0, /* not turbo by default */				\
48 		0, /* not slfm by default */				\
49 		0  /* power is hardcoded in software. */		\
50 	})
51 #define SPEEDSTEP_ENCODE_STATE(state)	(				\
52 	((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) |	\
53 	((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) |	\
54 	((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) |		\
55 	((uint16_t)(state).vid & SPEEDSTEP_VID_MASK))
56 #define SPEEDSTEP_DOUBLE_RATIO(state)	(				\
57 	((uint8_t)(state).ratio * 2) + (state).nonint)
58 
59 struct sst_params {
60 	struct sst_state slfm;
61 	struct sst_state min;
62 	struct sst_state max;
63 	struct sst_state turbo;
64 };
65 
66 /* Looking at core2's spec, the highest normal bus ratio for an eist enabled
67    processor is 14, the lowest is always 6. This makes 5 states with the
68    minimal step width of 2. With turbo mode and super LFM we have at most 7. */
69 #define SPEEDSTEP_MAX_NORMAL_STATES	5
70 #define SPEEDSTEP_MAX_STATES		(SPEEDSTEP_MAX_NORMAL_STATES + 2)
71 struct sst_table {
72 	/* Table of p-states for EMTTM and ACPI by decreasing performance. */
73 	struct sst_state states[SPEEDSTEP_MAX_STATES];
74 	int num_states;
75 };
76 
77 void speedstep_gen_pstates(struct sst_table *);
78 
79 #define SPEEDSTEP_MAX_POWER_YONAH	31000
80 #define SPEEDSTEP_MIN_POWER_YONAH	13100
81 #define SPEEDSTEP_MAX_POWER_MEROM	35000
82 #define SPEEDSTEP_MIN_POWER_MEROM	25000
83 #define SPEEDSTEP_SLFM_POWER_MEROM	12000
84 #define SPEEDSTEP_MAX_POWER_PENRYN	35000
85 #define SPEEDSTEP_MIN_POWER_PENRYN	15000
86 #define SPEEDSTEP_SLFM_POWER_PENRYN	12000
87 
88 #endif
89