1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 *
4 * Copyright (C) 2015 Phil Sutter <phil@nwl.cc>
5 */
6
7 #include <common.h>
8 #include <init.h>
9 #include <miiphy.h>
10 #include <asm/global_data.h>
11 #include <asm/io.h>
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/soc.h>
14 #include <linux/bitops.h>
15 #include <linux/mbus.h>
16
17 #include "../drivers/ddr/marvell/axp/ddr3_hw_training.h"
18 #include "../arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h"
19 #include "../arch/arm/mach-mvebu/serdes/axp/board_env_spec.h"
20
21 DECLARE_GLOBAL_DATA_PTR;
22
23 /* GPP and MPP settings as found in mvBoardEnvSpec.c of Synology's U-Boot */
24
25 #define DS414_GPP_OUT_VAL_LOW (BIT(25) | BIT(30))
26 #define DS414_GPP_OUT_VAL_MID (BIT(10) | BIT(15))
27 #define DS414_GPP_OUT_VAL_HIGH (0)
28
29 #define DS414_GPP_OUT_POL_LOW (0)
30 #define DS414_GPP_OUT_POL_MID (0)
31 #define DS414_GPP_OUT_POL_HIGH (0)
32
33 #define DS414_GPP_OUT_ENA_LOW (~(BIT(25) | BIT(30)))
34 #define DS414_GPP_OUT_ENA_MID (~(BIT(10) | BIT(12) | \
35 BIT(13) | BIT(14) | BIT(15)))
36 #define DS414_GPP_OUT_ENA_HIGH (~0)
37
38 static const u32 ds414_mpp_control[] = {
39 0x11111111,
40 0x22221111,
41 0x22222222,
42 0x00000000,
43 0x11110000,
44 0x00004000,
45 0x00000000,
46 0x00000000,
47 0x00000000
48 };
49
50 /* DDR3 static MC configuration */
51
52 /* 1G_v1 (4x2Gbits) adapted by DS414 */
53 MV_DRAM_MC_INIT syno_ddr3_b0_667_1g_v1[MV_MAX_DDR3_STATIC_SIZE] = {
54 {0x00001400, 0x73014A28}, /*DDR SDRAM Configuration Register */
55 {0x00001404, 0x30000800}, /*Dunit Control Low Register */
56 {0x00001408, 0x44148887}, /*DDR SDRAM Timing (Low) Register */
57 {0x0000140C, 0x3AD83FEA}, /*DDR SDRAM Timing (High) Register */
58
59 {0x00001410, 0x14000000}, /*DDR SDRAM Address Control Register */
60
61 {0x00001414, 0x00000000}, /*DDR SDRAM Open Pages Control Register */
62 {0x00001418, 0x00000e00}, /*DDR SDRAM Operation Register */
63 {0x00001420, 0x00000004}, /*DDR SDRAM Extended Mode Register */
64 {0x00001424, 0x0000F3FF}, /*Dunit Control High Register */
65 {0x00001428, 0x000F8830}, /*Dunit Control High Register */
66 {0x0000142C, 0x054C36F4}, /*Dunit Control High Register */
67 {0x0000147C, 0x0000C671},
68
69 {0x000014a0, 0x00000001},
70 {0x000014a8, 0x00000100}, /*2:1 */
71 {0x00020220, 0x00000006},
72
73 {0x00001494, 0x00010000}, /*DDR SDRAM ODT Control (Low) Register */
74 {0x00001498, 0x00000000}, /*DDR SDRAM ODT Control (High) Register */
75 {0x0000149C, 0x00000001}, /*DDR Dunit ODT Control Register */
76
77 {0x000014C0, 0x192424C9}, /* DRAM address and Control Driving Strenght */
78 {0x000014C4, 0x0AAA24C9}, /* DRAM Data and DQS Driving Strenght */
79
80 {0x000200e8, 0x3FFF0E01}, /* DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the training sequence*/
81 {0x00020184, 0x3FFFFFE0}, /* DO NOT Modify - Close fast path Window to - 2G */
82
83 {0x0001504, 0x3FFFFFE1}, /* CS0 Size */
84 {0x000150C, 0x00000000}, /* CS1 Size */
85 {0x0001514, 0x00000000}, /* CS2 Size */
86 {0x000151C, 0x00000000}, /* CS3 Size */
87
88 {0x00001538, 0x00000009}, /*Read Data Sample Delays Register */
89 {0x0000153C, 0x00000009}, /*Read Data Ready Delay Register */
90
91 {0x000015D0, 0x00000650}, /*MR0 */
92 {0x000015D4, 0x00000044}, /*MR1 */
93 {0x000015D8, 0x00000010}, /*MR2 */
94 {0x000015DC, 0x00000000}, /*MR3 */
95
96 {0x000015E4, 0x00203c18}, /*ZQC Configuration Register */
97 {0x000015EC, 0xF800A225}, /*DDR PHY */
98
99 {0x0, 0x0}
100 };
101
102 MV_DRAM_MODES ds414_ddr_modes[MV_DDR3_MODES_NUMBER] = {
103 {"ds414_1333-667", 0x3, 0x5, 0x0, A0, syno_ddr3_b0_667_1g_v1, NULL},
104 };
105
106 extern MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[];
107
108 MV_BIN_SERDES_CFG ds414_serdes_cfg[] = {
109 { MV_PEX_ROOT_COMPLEX, 0x02011111, 0x00000000,
110 { PEX_BUS_MODE_X4, PEX_BUS_MODE_X1, PEX_BUS_DISABLED,
111 PEX_BUS_DISABLED },
112 0x0040, serdes_change_m_phy
113 }
114 };
115
ddr3_get_static_ddr_mode(void)116 MV_DRAM_MODES *ddr3_get_static_ddr_mode(void)
117 {
118 return &ds414_ddr_modes[0];
119 }
120
board_serdes_cfg_get(void)121 MV_BIN_SERDES_CFG *board_serdes_cfg_get(void)
122 {
123 return &ds414_serdes_cfg[0];
124 }
125
board_sat_r_get(u8 dev_num,u8 reg)126 u8 board_sat_r_get(u8 dev_num, u8 reg)
127 {
128 return 0xf; /* All PEX ports support PCIe Gen2 */
129 }
130
board_early_init_f(void)131 int board_early_init_f(void)
132 {
133 int i;
134
135 /* Set GPP Out value */
136 reg_write(GPP_DATA_OUT_REG(0), DS414_GPP_OUT_VAL_LOW);
137 reg_write(GPP_DATA_OUT_REG(1), DS414_GPP_OUT_VAL_MID);
138 reg_write(GPP_DATA_OUT_REG(2), DS414_GPP_OUT_VAL_HIGH);
139
140 /* set GPP polarity */
141 reg_write(GPP_DATA_IN_POL_REG(0), DS414_GPP_OUT_POL_LOW);
142 reg_write(GPP_DATA_IN_POL_REG(1), DS414_GPP_OUT_POL_MID);
143 reg_write(GPP_DATA_IN_POL_REG(2), DS414_GPP_OUT_POL_HIGH);
144
145 /* Set GPP Out Enable */
146 reg_write(GPP_DATA_OUT_EN_REG(0), DS414_GPP_OUT_ENA_LOW);
147 reg_write(GPP_DATA_OUT_EN_REG(1), DS414_GPP_OUT_ENA_MID);
148 reg_write(GPP_DATA_OUT_EN_REG(2), DS414_GPP_OUT_ENA_HIGH);
149
150 for (i = 0; i < ARRAY_SIZE(ds414_mpp_control); i++)
151 reg_write(MPP_CONTROL_REG(i), ds414_mpp_control[i]);
152
153 return 0;
154 }
155
board_init(void)156 int board_init(void)
157 {
158 u32 pwr_mng_ctrl_reg;
159
160 /* Adress of boot parameters */
161 gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
162
163 /* Gate unused clocks
164 *
165 * Note: Disabling unused PCIe lanes will hang PCI bus scan.
166 * Once this is resolved, bits 10-12, 26 and 27 can be
167 * unset here as well.
168 */
169 pwr_mng_ctrl_reg = reg_read(POWER_MNG_CTRL_REG);
170 pwr_mng_ctrl_reg &= ~(BIT(0)); /* Audio */
171 pwr_mng_ctrl_reg &= ~(BIT(1) | BIT(2)); /* GE3, GE2 */
172 pwr_mng_ctrl_reg &= ~(BIT(14) | BIT(15)); /* SATA0 link and core */
173 pwr_mng_ctrl_reg &= ~(BIT(16)); /* LCD */
174 pwr_mng_ctrl_reg &= ~(BIT(17)); /* SDIO */
175 pwr_mng_ctrl_reg &= ~(BIT(19) | BIT(20)); /* USB1 and USB2 */
176 pwr_mng_ctrl_reg &= ~(BIT(29) | BIT(30)); /* SATA1 link and core */
177 reg_write(POWER_MNG_CTRL_REG, pwr_mng_ctrl_reg);
178
179 return 0;
180 }
181
checkboard(void)182 int checkboard(void)
183 {
184 puts("Board: DS414\n");
185
186 return 0;
187 }
188