1U-Boot for the NXP i.MX8QM EVK board
2
3Quick Start
4===========
5
6- Build the ARM Trusted firmware binary
7- Get scfw_tcm.bin and ahab-container.img
8- Build U-Boot
9- Flash the binary into the SD card
10- Boot
11
12Get and Build the ARM Trusted firmware
13======================================
14
15$ git clone https://source.codeaurora.org/external/imx/imx-atf
16$ cd imx-atf/
17$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga
18$ make PLAT=imx8qm bl31
19
20Get scfw_tcm.bin and ahab-container.img
21==============================
22
23$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin
24$ chmod +x imx-sc-firmware-1.1.bin
25$ ./imx-sc-firmware-1.1.bin
26$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
27$ chmod +x firmware-imx-8.0.bin
28$ ./firmware-imx-8.0.bin
29
30Copy the following binaries to U-Boot folder:
31
32$ cp imx-atf/build/imx8qm/release/bl31.bin .
33$ cp u-boot/u-boot.bin .
34
35Copy the following firmwares U-Boot folder :
36
37$ cp firmware-imx-7.6/firmware/seco/ahab-container.img .
38$ cp imx-sc-firmware-0.7/mx8qm-mek-scfw-tcm.bin	.
39
40Build U-Boot
41============
42$ make imx8qm_mek_defconfig
43$ make flash.bin
44
45Flash the binary into the SD card
46=================================
47
48Burn the flash.bin binary to SD card offset 32KB:
49
50$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
51
52Boot
53====
54Set Boot switch SW2: 1100.
55