1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright 2013 Freescale Semiconductor, Inc. 4 */ 5 6 #include <common.h> 7 #include <asm/mmu.h> 8 9 struct fsl_e_tlb_entry tlb_table[] = { 10 /* TLB 0 - for temp stack in cache */ 11 SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, 12 CONFIG_SYS_INIT_RAM_ADDR_PHYS, 13 MAS3_SX|MAS3_SW|MAS3_SR, 0, 14 0, 0, BOOKE_PAGESZ_4K, 0), 15 SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, 16 CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, 17 MAS3_SX|MAS3_SW|MAS3_SR, 0, 18 0, 0, BOOKE_PAGESZ_4K, 0), 19 SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, 20 CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, 21 MAS3_SX|MAS3_SW|MAS3_SR, 0, 22 0, 0, BOOKE_PAGESZ_4K, 0), 23 SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, 24 CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, 25 MAS3_SX|MAS3_SW|MAS3_SR, 0, 26 0, 0, BOOKE_PAGESZ_4K, 0), 27 28 /* TLB 1 */ 29 /* *I*** - Covers boot page */ 30 #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) && \ 31 !defined(CONFIG_NXP_ESBC) 32 /* 33 * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the 34 * SRAM is at 0xfffc0000, it covered the 0xfffff000. 35 */ 36 SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, 37 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 38 0, 0, BOOKE_PAGESZ_256K, 1), 39 40 #elif defined(CONFIG_NXP_ESBC) && defined(CONFIG_SPL_BUILD) 41 /* 42 * *I*G - L3SRAM. When L3 is used as 256K SRAM, in case of Secure Boot 43 * the physical address of the SRAM is at 0xbffc0000, 44 * and virtual address is 0xfffc0000 45 */ 46 47 SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_VADDR, 48 CONFIG_SYS_INIT_L3_ADDR, 49 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 50 0, 0, BOOKE_PAGESZ_256K, 1), 51 #else 52 SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, 53 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 54 0, 0, BOOKE_PAGESZ_4K, 1), 55 #endif 56 57 /* *I*G* - CCSRBAR */ 58 SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, 59 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 60 0, 1, BOOKE_PAGESZ_16M, 1), 61 62 /* *I*G* - Flash, localbus */ 63 /* This will be changed to *I*G* after relocation to RAM. */ 64 SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, 65 MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 66 0, 2, BOOKE_PAGESZ_256M, 1), 67 68 #ifndef CONFIG_SPL_BUILD 69 /* *I*G* - PCI */ 70 SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, 71 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 72 0, 3, BOOKE_PAGESZ_1G, 1), 73 74 /* *I*G* - PCI I/O */ 75 SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, 76 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 77 0, 4, BOOKE_PAGESZ_256K, 1), 78 79 /* Bman/Qman */ 80 #ifdef CONFIG_SYS_BMAN_MEM_PHYS 81 SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, 82 MAS3_SX|MAS3_SW|MAS3_SR, 0, 83 0, 5, BOOKE_PAGESZ_16M, 1), 84 SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, 85 CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, 86 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 87 0, 6, BOOKE_PAGESZ_16M, 1), 88 #endif 89 #ifdef CONFIG_SYS_QMAN_MEM_PHYS 90 SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, 91 MAS3_SX|MAS3_SW|MAS3_SR, 0, 92 0, 7, BOOKE_PAGESZ_16M, 1), 93 SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, 94 CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, 95 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 96 0, 8, BOOKE_PAGESZ_16M, 1), 97 #endif 98 #endif 99 #ifdef CONFIG_SYS_DCSRBAR_PHYS 100 SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, 101 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 102 0, 9, BOOKE_PAGESZ_4M, 1), 103 #endif 104 #ifdef CONFIG_SYS_NAND_BASE 105 /* 106 * *I*G - NAND 107 * entry 14 and 15 has been used hard coded, they will be disabled 108 * in cpu_init_f, so we use entry 16 for nand. 109 */ 110 SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, 111 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 112 0, 10, BOOKE_PAGESZ_64K, 1), 113 #endif 114 #ifdef CONFIG_SYS_CPLD_BASE 115 SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, 116 MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 117 0, 11, BOOKE_PAGESZ_256K, 1), 118 #endif 119 120 #if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) 121 SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, 122 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 123 0, 12, BOOKE_PAGESZ_1G, 1), 124 SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, 125 CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, 126 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 127 0, 13, BOOKE_PAGESZ_1G, 1) 128 #endif 129 }; 130 131 int num_tlb_entries = ARRAY_SIZE(tlb_table); 132