Name |
Date |
Size |
#Lines |
LOC |
||
|---|---|---|---|---|---|---|
| .. | 18-Mar-2022 | - | ||||
| neo/ | 18-Mar-2022 | - | ||||
| Kconfig | A D | 18-Mar-2022 | 96 | 10 | 6 | |
| MAINTAINERS | A D | 18-Mar-2022 | 133 | 7 | 6 | |
| Makefile | A D | 18-Mar-2022 | 118 | 6 | 1 | |
| README | A D | 18-Mar-2022 | 517 | 22 | 13 | |
| udoo.c | A D | 18-Mar-2022 | 7.6 KiB | 277 | 208 | |
| udoo_spl.c | A D | 18-Mar-2022 | 6.9 KiB | 258 | 205 |
README
1How to use U-Boot on MX6Q/DL Udoo boards 2---------------------------------------- 3 4- Build U-Boot for MX6Q/DL Udoo boards: 5 6$ make mrproper 7$ make udoo_defconfig 8$ make 9 10This will generate the SPL image called SPL and the u-boot.img. 11 12- Flash the SPL image into the SD card: 13 14sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync 15 16- Flash the u-boot.img image into the SD card: 17 18sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync 19 20- Insert the SD card in the board, power it up and U-Boot messages should 21come up. 22