1CONFIG_ARM=y
2CONFIG_ARCH_AT91=y
3CONFIG_SYS_TEXT_BASE=0x21f00000
4CONFIG_TARGET_AT91SAM9261EK=y
5CONFIG_SYS_MALLOC_F_LEN=0x2000
6CONFIG_NR_DRAM_BANKS=1
7CONFIG_DM_GPIO=y
8CONFIG_DEBUG_UART_BOARD_INIT=y
9CONFIG_DEBUG_UART_BASE=0xfffff200
10CONFIG_DEBUG_UART_CLOCK=100000000
11CONFIG_ENV_OFFSET_REDUND=0x100000
12CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
13CONFIG_DEBUG_UART=y
14CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_NANDFLASH"
15CONFIG_BOOTDELAY=3
16CONFIG_USE_BOOTARGS=y
17CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
18CONFIG_SYS_CONSOLE_IS_IN_ENV=y
19# CONFIG_DISPLAY_BOARDINFO is not set
20CONFIG_SYS_PROMPT="U-Boot> "
21# CONFIG_CMD_BDI is not set
22# CONFIG_CMD_IMI is not set
23# CONFIG_CMD_LOADS is not set
24CONFIG_CMD_NAND=y
25CONFIG_CMD_USB=y
26# CONFIG_CMD_SOURCE is not set
27# CONFIG_CMD_SETEXPR is not set
28CONFIG_CMD_DHCP=y
29CONFIG_CMD_PING=y
30CONFIG_CMD_FAT=y
31CONFIG_OF_CONTROL=y
32CONFIG_ENV_IS_IN_NAND=y
33CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
34CONFIG_SYS_RELOC_GD_ENV_ADDR=y
35CONFIG_DM=y
36CONFIG_CLK=y
37CONFIG_CLK_AT91=y
38CONFIG_AT91_GPIO=y
39# CONFIG_MMC is not set
40CONFIG_MTD=y
41CONFIG_MTD_RAW_NAND=y
42CONFIG_NAND_ATMEL=y
43CONFIG_DM_SPI_FLASH=y
44CONFIG_SPI_FLASH_ATMEL=y
45CONFIG_SPI_FLASH_DATAFLASH=y
46CONFIG_PINCTRL=y
47CONFIG_PINCTRL_AT91=y
48CONFIG_DM_SERIAL=y
49CONFIG_DEBUG_UART_ANNOUNCE=y
50CONFIG_ATMEL_USART=y
51CONFIG_SPI=y
52CONFIG_DM_SPI=y
53CONFIG_USB=y
54CONFIG_USB_STORAGE=y
55