1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2013-2019 Toradex, Inc. 4 * 5 * Configuration settings for the Toradex Apalis iMX6 6 */ 7 8 #ifndef __CONFIG_H 9 #define __CONFIG_H 10 11 #include <linux/stringify.h> 12 13 #include "mx6_common.h" 14 15 #undef CONFIG_DISPLAY_BOARDINFO 16 17 #define CONFIG_MACH_TYPE 4886 18 19 #include <asm/arch/imx-regs.h> 20 #include <asm/mach-imx/gpio.h> 21 22 #ifdef CONFIG_SPL 23 #include "imx6_spl.h" 24 #endif 25 26 #define CONFIG_CMDLINE_TAG 27 #define CONFIG_SETUP_MEMORY_TAGS 28 #define CONFIG_INITRD_TAG 29 #define CONFIG_REVISION_TAG 30 #define CONFIG_SERIAL_TAG 31 32 /* Size of malloc() pool */ 33 #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) 34 35 #define CONFIG_MXC_UART_BASE UART1_BASE 36 37 /* I2C Configs */ 38 #define CONFIG_SYS_I2C_MXC 39 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 40 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 41 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 42 #define CONFIG_SYS_I2C_SPEED 100000 43 #define CONFIG_SYS_MXC_I2C3_SPEED 400000 44 45 /* MMC Configs */ 46 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 47 #define CONFIG_SYS_FSL_USDHC_NUM 3 48 49 /* 50 * SATA Configs 51 */ 52 #ifdef CONFIG_CMD_SATA 53 #define CONFIG_LBA48 54 #endif 55 56 /* Network */ 57 #define PHY_ANEG_TIMEOUT 15000 /* PHY needs longer aneg time */ 58 59 /* USB Configs */ 60 /* Host */ 61 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 62 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 63 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 64 #define CONFIG_MXC_USB_FLAGS 0 65 /* Client */ 66 #define CONFIG_USBD_HS 67 68 /* Framebuffer and LCD */ 69 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 70 #define CONFIG_VIDEO_LOGO 71 #define CONFIG_VIDEO_BMP_LOGO 72 #define CONFIG_IMX_HDMI 73 #define CONFIG_IMX_VIDEO_SKIP 74 75 /* Command definition */ 76 77 #undef CONFIG_IPADDR 78 #define CONFIG_IPADDR 192.168.10.2 79 #define CONFIG_NETMASK 255.255.255.0 80 #undef CONFIG_SERVERIP 81 #define CONFIG_SERVERIP 192.168.10.1 82 83 #define CONFIG_LOADADDR 0x12000000 84 85 #ifndef CONFIG_SPL_BUILD 86 #define BOOT_TARGET_DEVICES(func) \ 87 func(MMC, mmc, 1) \ 88 func(MMC, mmc, 2) \ 89 func(MMC, mmc, 0) \ 90 func(USB, usb, 0) \ 91 func(DHCP, dhcp, na) 92 #include <config_distro_bootcmd.h> 93 #undef BOOTENV_RUN_NET_USB_START 94 #define BOOTENV_RUN_NET_USB_START "" 95 #else /* CONFIG_SPL_BUILD */ 96 #define BOOTENV 97 #endif /* CONFIG_SPL_BUILD */ 98 99 #define UBOOT_UPDATE \ 100 "uboot_hwpart=1\0" \ 101 "uboot_blk=8a\0" \ 102 "uboot_spl_blk=2\0" \ 103 "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ 104 "setexpr blkcnt ${blkcnt} / 0x200\0" \ 105 "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ 106 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ 107 "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ 108 "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0" 109 110 #define MEM_LAYOUT_ENV_SETTINGS \ 111 "bootm_size=0x20000000\0" \ 112 "fdt_addr_r=0x12100000\0" \ 113 "kernel_addr_r=0x11000000\0" \ 114 "pxefile_addr_r=0x17100000\0" \ 115 "ramdisk_addr_r=0x12200000\0" \ 116 "scriptaddr=0x17000000\0" 117 118 #define NFS_BOOTCMD \ 119 "nfsargs=ip=:::::eth0:on root=/dev/nfs ro\0" \ 120 "nfsboot=run setup; " \ 121 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ 122 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ 123 "run nfsdtbload; dhcp ${kernel_addr_r} " \ 124 "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \ 125 "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ 126 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 127 128 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0 129 #define FDT_FILE "imx6q-apalis-eval.dtb" 130 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb" 131 #else 132 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb" 133 #endif 134 #define CONFIG_EXTRA_ENV_SETTINGS \ 135 BOOTENV \ 136 "bootcmd=run distro_bootcmd ; " \ 137 "usb start ; " \ 138 "setenv stdout serial,vidconsole; " \ 139 "setenv stdin serial,usbkbd\0" \ 140 "boot_file=zImage\0" \ 141 "console=ttymxc0\0" \ 142 "defargs=enable_wait_mode=off vmalloc=400M\0" \ 143 "fdt_file=" FDT_FILE "\0" \ 144 "fdtfile=" FDT_FILE "\0" \ 145 "fdt_fixup=;\0" \ 146 MEM_LAYOUT_ENV_SETTINGS \ 147 NFS_BOOTCMD \ 148 UBOOT_UPDATE \ 149 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ 150 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ 151 "flash_eth.img && source ${loadaddr}\0" \ 152 "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \ 153 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \ 154 "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \ 155 " ${loadaddr} flash_blk.img && " \ 156 "source ${loadaddr}\0" \ 157 "setup=setenv setupargs fec_mac=${ethaddr} " \ 158 "consoleblank=0 no_console_suspend=1 console=tty1 " \ 159 "console=${console},${baudrate}n8\0 " \ 160 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ 161 "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ 162 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ 163 "source ${loadaddr}\0" \ 164 "splashpos=m,m\0" \ 165 "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \ 166 "vidargs=mxc_hdmi.only_cea=1 " \ 167 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \ 168 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \ 169 "fbmem=32M\0 " 170 171 /* Miscellaneous configurable options */ 172 #undef CONFIG_SYS_CBSIZE 173 #define CONFIG_SYS_CBSIZE 1024 174 #undef CONFIG_SYS_MAXARGS 175 #define CONFIG_SYS_MAXARGS 48 176 177 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 178 179 /* Physical Memory Map */ 180 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 181 182 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 183 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 184 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 185 186 #define CONFIG_SYS_INIT_SP_OFFSET \ 187 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 188 #define CONFIG_SYS_INIT_SP_ADDR \ 189 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 190 191 #endif /* __CONFIG_H */ 192