1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2007-2008 4 * Stelian Pop <stelian@popies.net> 5 * Lead Tech Design <www.leadtechdesign.com> 6 * 7 * Configuation settings for the AT91SAM9261EK board. 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 /* ARM asynchronous clock */ 14 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 15 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ 16 17 #ifdef CONFIG_AT91SAM9G10 18 #define CONFIG_AT91SAM9G10EK /* It's an Atmel AT91SAM9G10 EK*/ 19 #else 20 #define CONFIG_AT91SAM9261EK /* It's an Atmel AT91SAM9261 EK*/ 21 #endif 22 23 #include <asm/hardware.h> 24 25 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 26 #define CONFIG_SETUP_MEMORY_TAGS 27 #define CONFIG_INITRD_TAG 28 29 #define CONFIG_SKIP_LOWLEVEL_INIT 30 31 #define CONFIG_ATMEL_LEGACY 32 33 /* 34 * Hardware drivers 35 */ 36 37 /* LCD */ 38 #define LCD_BPP LCD_COLOR8 39 #define CONFIG_LCD_LOGO 40 #undef LCD_TEST_PATTERN 41 #define CONFIG_LCD_INFO 42 #define CONFIG_LCD_INFO_BELOW_LOGO 43 #define CONFIG_ATMEL_LCD 44 #ifdef CONFIG_AT91SAM9261EK 45 #define CONFIG_ATMEL_LCD_BGR555 46 #endif 47 48 /* 49 * BOOTP options 50 */ 51 #define CONFIG_BOOTP_BOOTFILESIZE 52 53 /* SDRAM */ 54 #define CONFIG_SYS_SDRAM_BASE 0x20000000 55 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 56 #define CONFIG_SYS_INIT_SP_ADDR \ 57 (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE) 58 59 /* NAND flash */ 60 #ifdef CONFIG_CMD_NAND 61 #define CONFIG_SYS_MAX_NAND_DEVICE 1 62 #define CONFIG_SYS_NAND_BASE 0x40000000 63 #define CONFIG_SYS_NAND_DBW_8 64 /* our ALE is AD22 */ 65 #define CONFIG_SYS_NAND_MASK_ALE (1 << 22) 66 /* our CLE is AD21 */ 67 #define CONFIG_SYS_NAND_MASK_CLE (1 << 21) 68 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 69 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15 70 71 #endif 72 73 /* Ethernet */ 74 #define CONFIG_DRIVER_DM9000 75 #define CONFIG_DM9000_BASE 0x30000000 76 #define DM9000_IO CONFIG_DM9000_BASE 77 #define DM9000_DATA (CONFIG_DM9000_BASE + 4) 78 #define CONFIG_DM9000_USE_16BIT 79 #define CONFIG_DM9000_NO_SROM 80 #define CONFIG_NET_RETRY_COUNT 20 81 #define CONFIG_RESET_PHY_R 82 83 /* USB */ 84 #define CONFIG_USB_ATMEL 85 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 86 #define CONFIG_USB_OHCI_NEW 87 #define CONFIG_SYS_USB_OHCI_CPU_INIT 88 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */ 89 #ifdef CONFIG_AT91SAM9G10EK 90 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g10" 91 #else 92 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" 93 #endif 94 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 95 96 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 97 98 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 99 100 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 101 #define CONFIG_BOOTCOMMAND "sf probe 0; " \ 102 "sf read 0x22000000 0x84000 0x294000; " \ 103 "bootm 0x22000000" 104 105 #elif CONFIG_SYS_USE_DATAFLASH_CS3 106 107 /* bootstrap + u-boot + env + linux in dataflash on CS3 */ 108 #define CONFIG_BOOTCOMMAND "sf probe 0:3; " \ 109 "sf read 0x22000000 0x84000 0x294000; " \ 110 "bootm 0x22000000" 111 112 #else /* CONFIG_SYS_USE_NANDFLASH */ 113 114 /* bootstrap + u-boot + env + linux in nandflash */ 115 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" 116 #endif 117 118 /* 119 * Size of malloc() pool 120 */ 121 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 122 123 #endif 124