1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Board configuration file for Dragonboard 410C 4 * 5 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com> 6 */ 7 8 #ifndef __CONFIGS_DRAGONBOARD410C_H 9 #define __CONFIGS_DRAGONBOARD410C_H 10 11 #include <linux/sizes.h> 12 #include <asm/arch/sysmap-apq8016.h> 13 14 /* Physical Memory Map */ 15 #define PHYS_SDRAM_1 0x80000000 16 /* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/ 17 #define PHYS_SDRAM_1_SIZE 0x3da00000 18 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 19 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) 20 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) 21 #define CONFIG_SYS_BOOTM_LEN SZ_64M 22 23 /* UART */ 24 25 /* Generic Timer Definitions */ 26 #define COUNTER_FREQUENCY 19000000 27 28 /* Fixup - in init code we switch from device to host mode, 29 * it has to be done after each HCD reset */ 30 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 31 32 /* BOOTP options */ 33 #define CONFIG_BOOTP_BOOTFILESIZE 34 35 #define BOOT_TARGET_DEVICES(func) \ 36 func(USB, usb, 0) \ 37 func(MMC, mmc, 1) \ 38 func(MMC, mmc, 0) \ 39 func(DHCP, dhcp, na) 40 41 #include <config_distro_bootcmd.h> 42 43 /* Does what recovery does */ 44 #define REFLASH(file, part) \ 45 "part start mmc 0 "#part" start && "\ 46 "part size mmc 0 "#part" size && "\ 47 "tftp $loadaddr "#file" && " \ 48 "mmc write $loadaddr $start $size && " 49 50 #define CONFIG_ENV_REFLASH \ 51 "mmc dev 0 && "\ 52 "usb start && "\ 53 "dhcp && "\ 54 "tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\ 55 "mmc write $loadaddr 0 43 && " \ 56 "mmc rescan && "\ 57 REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\ 58 REFLASH(dragonboard/rescue/sbl1.mbn, 2)\ 59 REFLASH(dragonboard/rescue/rpm.mbn, 3)\ 60 REFLASH(dragonboard/rescue/tz.mbn, 4)\ 61 REFLASH(dragonboard/rescue/hyp.mbn, 5)\ 62 REFLASH(dragonboard/rescue/sec.dat, 6)\ 63 REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\ 64 REFLASH(dragonboard/u-boot.img, 8)\ 65 "usb stop &&"\ 66 "echo Reflash completed" 67 68 /* Environment */ 69 #define CONFIG_EXTRA_ENV_SETTINGS \ 70 "reflash="CONFIG_ENV_REFLASH"\0"\ 71 "loadaddr=0x81000000\0" \ 72 "initrd_high=0xffffffffffffffff\0" \ 73 "linux_image=Image\0" \ 74 "kernel_addr_r=0x81000000\0"\ 75 "fdtfile=qcom/apq8016-sbc.dtb\0" \ 76 "fdt_addr_r=0x83000000\0"\ 77 "ramdisk_addr_r=0x84000000\0"\ 78 "scriptaddr=0x90000000\0"\ 79 "pxefile_addr_r=0x90100000\0"\ 80 BOOTENV 81 82 /* Size of malloc() pool */ 83 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M) 84 85 /* Monitor Command Prompt */ 86 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 87 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 88 89 #endif 90