1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2013 Samsung Electronics 4 * 5 * Configuration settings for the SAMSUNG EXYNOS5 board. 6 */ 7 8 #ifndef __CONFIG_EXYNOS5_COMMON_H 9 #define __CONFIG_EXYNOS5_COMMON_H 10 11 #define CONFIG_EXYNOS5 /* Exynos5 Family */ 12 13 #include "exynos-common.h" 14 15 #define CONFIG_EXYNOS_SPL 16 17 #ifdef FTRACE 18 #define CONFIG_TRACE 19 #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) 20 #define CONFIG_TRACE_EARLY_SIZE (8 << 20) 21 #define CONFIG_TRACE_EARLY 22 #define CONFIG_TRACE_EARLY_ADDR 0x50000000 23 #endif 24 25 /* Enable ACE acceleration for SHA1 and SHA256 */ 26 #define CONFIG_EXYNOS_ACE_SHA 27 28 /* Power Down Modes */ 29 #define S5P_CHECK_SLEEP 0x00000BAD 30 #define S5P_CHECK_DIDLE 0xBAD00000 31 #define S5P_CHECK_LPA 0xABAD0000 32 33 /* Offset for inform registers */ 34 #define INFORM0_OFFSET 0x800 35 #define INFORM1_OFFSET 0x804 36 #define INFORM2_OFFSET 0x808 37 #define INFORM3_OFFSET 0x80c 38 39 /* select serial console configuration */ 40 #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 41 42 /* Thermal Management Unit */ 43 #define CONFIG_EXYNOS_TMU 44 45 /* MMC SPL */ 46 #define COPY_BL2_FNPTR_ADDR 0x02020030 47 48 /* specific .lds file */ 49 50 /* Boot Argument Buffer Size */ 51 /* memtest works on */ 52 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) 53 54 #define CONFIG_RD_LVL 55 56 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE 57 #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE 58 #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) 59 #define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE 60 #define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) 61 #define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE 62 #define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) 63 #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE 64 #define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) 65 #define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE 66 #define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) 67 #define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE 68 #define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) 69 #define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE 70 #define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) 71 #define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE 72 73 #define CONFIG_SYS_MONITOR_BASE 0x00000000 74 75 #define CONFIG_SECURE_BL1_ONLY 76 77 /* Secure FW size configuration */ 78 #ifdef CONFIG_SECURE_BL1_ONLY 79 #define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ 80 #else 81 #define CONFIG_SEC_FW_SIZE 0 82 #endif 83 84 /* Configuration of BL1, BL2, ENV Blocks on mmc */ 85 #define CONFIG_RES_BLOCK_SIZE (512) 86 #define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ 87 #define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ 88 89 #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) 90 #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) 91 92 /* U-Boot copy size from boot Media to DRAM.*/ 93 #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) 94 #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) 95 96 #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 97 #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) 98 99 /* I2C */ 100 #define CONFIG_SYS_I2C_S3C24X0 101 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ 102 #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 103 104 /* SPI */ 105 106 /* Ethernet Controllor Driver */ 107 #ifdef CONFIG_CMD_NET 108 #define CONFIG_ENV_SROM_BANK 1 109 #endif /*CONFIG_CMD_NET*/ 110 111 /* Enable Time Command */ 112 113 /* USB */ 114 115 /* USB boot mode */ 116 #define CONFIG_USB_BOOTING 117 #define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070 118 #define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 119 #define EXYNOS_IRAM_SECONDARY_BASE 0x02020018 120 121 #define BOOT_TARGET_DEVICES(func) \ 122 func(MMC, mmc, 2) \ 123 func(MMC, mmc, 1) \ 124 func(MMC, mmc, 0) \ 125 func(PXE, pxe, na) \ 126 func(DHCP, dhcp, na) 127 128 #include <config_distro_bootcmd.h> 129 130 #ifndef MEM_LAYOUT_ENV_SETTINGS 131 /* 2GB RAM, bootm size of 256M, load scripts after that */ 132 #define MEM_LAYOUT_ENV_SETTINGS \ 133 "bootm_size=0x10000000\0" \ 134 "kernel_addr_r=0x42000000\0" \ 135 "fdt_addr_r=0x43000000\0" \ 136 "ramdisk_addr_r=0x43300000\0" \ 137 "scriptaddr=0x50000000\0" \ 138 "pxefile_addr_r=0x51000000\0" 139 #endif 140 141 #ifndef EXYNOS_DEVICE_SETTINGS 142 #define EXYNOS_DEVICE_SETTINGS \ 143 "stdin=serial\0" \ 144 "stdout=serial\0" \ 145 "stderr=serial\0" 146 #endif 147 148 #ifndef EXYNOS_FDTFILE_SETTING 149 #define EXYNOS_FDTFILE_SETTING 150 #endif 151 152 #define CONFIG_EXTRA_ENV_SETTINGS \ 153 EXYNOS_DEVICE_SETTINGS \ 154 EXYNOS_FDTFILE_SETTING \ 155 MEM_LAYOUT_ENV_SETTINGS \ 156 BOOTENV 157 158 #endif /* __CONFIG_EXYNOS5_COMMON_H */ 159