1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> 4 * 5 * Based on dockstar.h originally written by 6 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> 7 * 8 * Based on sheevaplug.h originally written by 9 * Prafulla Wadaskar <prafulla@marvell.com> 10 * (C) Copyright 2009 11 * Marvell Semiconductor <www.marvell.com> 12 */ 13 14 #ifndef _CONFIG_GOFLEXHOME_H 15 #define _CONFIG_GOFLEXHOME_H 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 21 #define CONFIG_KW88F6281 1 /* SOC Name */ 22 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 23 24 /* 25 * Default GPIO configuration and LED status 26 */ 27 #define GOFLEXHOME_OE_LOW (~(0)) 28 #define GOFLEXHOME_OE_HIGH (~(0)) 29 #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ 30 #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ 31 32 /* PHY related */ 33 #define MV88E1116_LED_FCTRL_REG 10 34 #define MV88E1116_CPRSP_CR3_REG 21 35 #define MV88E1116_MAC_CTRL_REG 21 36 #define MV88E1116_PGADR_REG 22 37 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 38 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 39 40 #include "mv-common.h" 41 42 /* 43 * Environment variables configurations 44 */ 45 /* 46 * max 4k env size is enough, but in case of nand 47 * it has to be rounded to sector size 48 */ 49 50 /* 51 * Default environment variables 52 */ 53 #define CONFIG_BOOTCOMMAND \ 54 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 55 "ubi part root; " \ 56 "ubifsmount ubi:root; " \ 57 "ubifsload 0x800000 ${kernel}; " \ 58 "bootm 0x800000" 59 60 #define CONFIG_EXTRA_ENV_SETTINGS \ 61 "console=console=ttyS0,115200\0" \ 62 "mtdids=nand0=orion_nand\0" \ 63 "mtdparts="CONFIG_MTDPARTS_DEFAULT \ 64 "kernel=/boot/uImage\0" \ 65 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" 66 67 /* 68 * Ethernet Driver configuration 69 */ 70 #ifdef CONFIG_CMD_NET 71 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 72 #define CONFIG_PHY_BASE_ADR 0 73 #endif /* CONFIG_CMD_NET */ 74 75 /* 76 * * SATA Driver configuration 77 * */ 78 #ifdef CONFIG_MVSATA_IDE 79 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 80 #endif /*CONFIG_MVSATA_IDE*/ 81 82 #endif /* _CONFIG_GOFLEXHOME_H */ 83