1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2014 4 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc 5 * 6 */ 7 8 #ifndef __CONFIG_H 9 #define __CONFIG_H 10 11 #include <linux/stringify.h> 12 13 /* 14 * High Level Configuration Options 15 */ 16 #define CONFIG_E300 1 /* E300 family */ 17 18 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR 19 20 /* 21 * SERDES 22 */ 23 #define CONFIG_FSL_SERDES 24 #define CONFIG_FSL_SERDES1 0xe3000 25 26 /* 27 * DDR Setup 28 */ 29 #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ 30 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 31 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ 32 | DDRCDR_PZ_LOZ \ 33 | DDRCDR_NZ_LOZ \ 34 | DDRCDR_ODT \ 35 | DDRCDR_Q_DRN) 36 /* 0x7b880001 */ 37 /* 38 * Manually set up DDR parameters 39 * consist of one chip NT5TU64M16HG from NANYA 40 */ 41 42 #define CONFIG_SYS_DDR_SIZE 128 /* MB */ 43 44 #define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 45 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ 46 | CSCONFIG_ODT_RD_NEVER \ 47 | CSCONFIG_ODT_WR_ONLY_CURRENT \ 48 | CSCONFIG_BANK_BIT_3 \ 49 | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) 50 /* 0x80010102 */ 51 #define CONFIG_SYS_DDR_TIMING_3 0 52 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ 53 | (0 << TIMING_CFG0_WRT_SHIFT) \ 54 | (0 << TIMING_CFG0_RRT_SHIFT) \ 55 | (0 << TIMING_CFG0_WWT_SHIFT) \ 56 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ 57 | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ 58 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ 59 | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) 60 /* 0x00260802 */ 61 #define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \ 62 | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \ 63 | (2 << TIMING_CFG1_ACTTORW_SHIFT) \ 64 | (7 << TIMING_CFG1_CASLAT_SHIFT) \ 65 | (9 << TIMING_CFG1_REFREC_SHIFT) \ 66 | (2 << TIMING_CFG1_WRREC_SHIFT) \ 67 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ 68 | (2 << TIMING_CFG1_WRTORD_SHIFT)) 69 /* 0x26279222 */ 70 #define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \ 71 | (4 << TIMING_CFG2_CPO_SHIFT) \ 72 | (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ 73 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ 74 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ 75 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ 76 | (5 << TIMING_CFG2_FOUR_ACT_SHIFT)) 77 /* 0x021848c5 */ 78 #define CONFIG_SYS_DDR_INTERVAL ((0x0824 << SDRAM_INTERVAL_REFINT_SHIFT) \ 79 | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) 80 /* 0x08240100 */ 81 #define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ 82 | SDRAM_CFG_SDRAM_TYPE_DDR2 \ 83 | SDRAM_CFG_DBW_16) 84 /* 0x43100000 */ 85 86 #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */ 87 #define CONFIG_SYS_DDR_MODE ((0x0440 << SDRAM_MODE_ESD_SHIFT) \ 88 | (0x0242 << SDRAM_MODE_SD_SHIFT)) 89 /* ODT 150ohm CL=4, AL=0 on SDRAM */ 90 #define CONFIG_SYS_DDR_MODE2 0x00000000 91 92 /* 93 * Memory test 94 */ 95 96 /* 97 * The reserved memory 98 */ 99 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 100 101 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ 102 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ 103 104 /* 105 * Initial RAM Base Address Setup 106 */ 107 #define CONFIG_SYS_INIT_RAM_LOCK 1 108 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ 109 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ 110 #define CONFIG_SYS_GBL_DATA_OFFSET \ 111 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 112 113 /* 114 * FLASH on the Local Bus 115 */ 116 #if 1 117 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 118 #define CONFIG_FLASH_CFI_LEGACY 119 #define CONFIG_SYS_FLASH_LEGACY_512Kx16 120 #endif 121 122 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ 123 #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ 124 125 126 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 127 #define CONFIG_SYS_MAX_FLASH_SECT 135 128 129 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 130 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 131 132 #define CONFIG_SYS_FPGA_DONE(k) 0x0010 133 134 #define CONFIG_SYS_FPGA_COUNT 1 135 136 #define CONFIG_SYS_MCLINK_MAX 3 137 138 #define CONFIG_SYS_FPGA_PTR \ 139 { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, NULL, NULL, NULL } 140 141 /* 142 * Serial Port 143 */ 144 #define CONFIG_SYS_NS16550_SERIAL 145 #define CONFIG_SYS_NS16550_REG_SIZE 1 146 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 147 148 #define CONFIG_SYS_BAUDRATE_TABLE \ 149 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 150 151 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) 152 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) 153 154 /* Pass open firmware flat tree */ 155 156 /* I2C */ 157 #define CONFIG_SYS_I2C 158 #define CONFIG_SYS_I2C_FSL 159 #define CONFIG_SYS_FSL_I2C_SPEED 400000 160 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 161 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 162 163 #define CONFIG_PCA953X /* NXP PCA9554 */ 164 #define CONFIG_PCA9698 /* NXP PCA9698 */ 165 166 #define CONFIG_SYS_I2C_IHS 167 #define CONFIG_SYS_I2C_IHS_CH0 168 #define CONFIG_SYS_I2C_IHS_SPEED_0 50000 169 #define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F 170 #define CONFIG_SYS_I2C_IHS_CH1 171 #define CONFIG_SYS_I2C_IHS_SPEED_1 50000 172 #define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F 173 #define CONFIG_SYS_I2C_IHS_CH2 174 #define CONFIG_SYS_I2C_IHS_SPEED_2 50000 175 #define CONFIG_SYS_I2C_IHS_SLAVE_2 0x7F 176 #define CONFIG_SYS_I2C_IHS_CH3 177 #define CONFIG_SYS_I2C_IHS_SPEED_3 50000 178 #define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F 179 180 #ifdef CONFIG_HRCON_DH 181 #define CONFIG_SYS_I2C_IHS_DUAL 182 #define CONFIG_SYS_I2C_IHS_CH0_1 183 #define CONFIG_SYS_I2C_IHS_SPEED_0_1 50000 184 #define CONFIG_SYS_I2C_IHS_SLAVE_0_1 0x7F 185 #define CONFIG_SYS_I2C_IHS_CH1_1 186 #define CONFIG_SYS_I2C_IHS_SPEED_1_1 50000 187 #define CONFIG_SYS_I2C_IHS_SLAVE_1_1 0x7F 188 #define CONFIG_SYS_I2C_IHS_CH2_1 189 #define CONFIG_SYS_I2C_IHS_SPEED_2_1 50000 190 #define CONFIG_SYS_I2C_IHS_SLAVE_2_1 0x7F 191 #define CONFIG_SYS_I2C_IHS_CH3_1 192 #define CONFIG_SYS_I2C_IHS_SPEED_3_1 50000 193 #define CONFIG_SYS_I2C_IHS_SLAVE_3_1 0x7F 194 #endif 195 196 /* 197 * Software (bit-bang) I2C driver configuration 198 */ 199 #define CONFIG_SYS_I2C_SOFT 200 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 201 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F 202 #define I2C_SOFT_DECLARATIONS2 203 #define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 204 #define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F 205 #define I2C_SOFT_DECLARATIONS3 206 #define CONFIG_SYS_I2C_SOFT_SPEED_3 50000 207 #define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x7F 208 #define I2C_SOFT_DECLARATIONS4 209 #define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 210 #define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F 211 #define I2C_SOFT_DECLARATIONS5 212 #define CONFIG_SYS_I2C_SOFT_SPEED_5 50000 213 #define CONFIG_SYS_I2C_SOFT_SLAVE_5 0x7F 214 #define I2C_SOFT_DECLARATIONS6 215 #define CONFIG_SYS_I2C_SOFT_SPEED_6 50000 216 #define CONFIG_SYS_I2C_SOFT_SLAVE_6 0x7F 217 #define I2C_SOFT_DECLARATIONS7 218 #define CONFIG_SYS_I2C_SOFT_SPEED_7 50000 219 #define CONFIG_SYS_I2C_SOFT_SLAVE_7 0x7F 220 #define I2C_SOFT_DECLARATIONS8 221 #define CONFIG_SYS_I2C_SOFT_SPEED_8 50000 222 #define CONFIG_SYS_I2C_SOFT_SLAVE_8 0x7F 223 224 #ifdef CONFIG_HRCON_DH 225 #define I2C_SOFT_DECLARATIONS9 226 #define CONFIG_SYS_I2C_SOFT_SPEED_9 50000 227 #define CONFIG_SYS_I2C_SOFT_SLAVE_9 0x7F 228 #define I2C_SOFT_DECLARATIONS10 229 #define CONFIG_SYS_I2C_SOFT_SPEED_10 50000 230 #define CONFIG_SYS_I2C_SOFT_SLAVE_10 0x7F 231 #define I2C_SOFT_DECLARATIONS11 232 #define CONFIG_SYS_I2C_SOFT_SPEED_11 50000 233 #define CONFIG_SYS_I2C_SOFT_SLAVE_11 0x7F 234 #define I2C_SOFT_DECLARATIONS12 235 #define CONFIG_SYS_I2C_SOFT_SPEED_12 50000 236 #define CONFIG_SYS_I2C_SOFT_SLAVE_12 0x7F 237 #endif 238 239 #ifdef CONFIG_HRCON_DH 240 #define CONFIG_SYS_ICS8N3QV01_I2C {13, 14, 15, 16, 17, 18, 19, 20} 241 #define CONFIG_SYS_DP501_I2C {1, 3, 5, 7, 2, 4, 6, 8} 242 #define CONFIG_HRCON_FANS { {10, 0x4c}, {11, 0x4c}, \ 243 {12, 0x4c} } 244 #else 245 #define CONFIG_SYS_ICS8N3QV01_I2C {9, 10, 11, 12} 246 #define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} 247 #define CONFIG_HRCON_FANS { {6, 0x4c}, {7, 0x4c}, \ 248 {8, 0x4c} } 249 #endif 250 251 #ifndef __ASSEMBLY__ 252 void fpga_gpio_set(unsigned int bus, int pin); 253 void fpga_gpio_clear(unsigned int bus, int pin); 254 int fpga_gpio_get(unsigned int bus, int pin); 255 void fpga_control_set(unsigned int bus, int pin); 256 void fpga_control_clear(unsigned int bus, int pin); 257 #endif 258 259 #define I2C_SDA_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0040 : 0x0200) 260 #define I2C_SCL_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0020 : 0x0100) 261 #define I2C_FPGA_IDX (I2C_ADAP_HWNR % 4) 262 263 #ifdef CONFIG_HRCON_DH 264 #define I2C_ACTIVE \ 265 do { \ 266 if (I2C_ADAP_HWNR > 7) \ 267 fpga_control_set(I2C_FPGA_IDX, 0x0004); \ 268 else \ 269 fpga_control_clear(I2C_FPGA_IDX, 0x0004); \ 270 } while (0) 271 #else 272 #define I2C_ACTIVE { } 273 #endif 274 #define I2C_TRISTATE { } 275 #define I2C_READ \ 276 (fpga_gpio_get(I2C_FPGA_IDX, I2C_SDA_GPIO) ? 1 : 0) 277 #define I2C_SDA(bit) \ 278 do { \ 279 if (bit) \ 280 fpga_gpio_set(I2C_FPGA_IDX, I2C_SDA_GPIO); \ 281 else \ 282 fpga_gpio_clear(I2C_FPGA_IDX, I2C_SDA_GPIO); \ 283 } while (0) 284 #define I2C_SCL(bit) \ 285 do { \ 286 if (bit) \ 287 fpga_gpio_set(I2C_FPGA_IDX, I2C_SCL_GPIO); \ 288 else \ 289 fpga_gpio_clear(I2C_FPGA_IDX, I2C_SCL_GPIO); \ 290 } while (0) 291 #define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */ 292 293 /* 294 * Software (bit-bang) MII driver configuration 295 */ 296 #define CONFIG_BITBANGMII_MULTI 297 298 /* 299 * OSD Setup 300 */ 301 #define CONFIG_SYS_OSD_SCREENS 1 302 #define CONFIG_SYS_DP501_DIFFERENTIAL 303 #define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */ 304 305 #ifdef CONFIG_HRCON_DH 306 #define CONFIG_SYS_OSD_DH 307 #endif 308 309 /* 310 * General PCI 311 * Addresses are mapped 1-1. 312 */ 313 #define CONFIG_SYS_PCIE1_BASE 0xA0000000 314 #define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000 315 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000 316 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 317 #define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000 318 #define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000 319 #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 320 #define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000 321 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 322 323 /* enable PCIE clock */ 324 #define CONFIG_SYS_SCCR_PCIEXP1CM 1 325 326 #define CONFIG_PCI_INDIRECT_BRIDGE 327 #define CONFIG_PCIE 328 329 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ 330 #define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1 331 332 /* 333 * TSEC 334 */ 335 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 336 #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) 337 338 /* 339 * TSEC ethernet configuration 340 */ 341 #define CONFIG_TSEC1 342 #define CONFIG_TSEC1_NAME "eTSEC0" 343 #define TSEC1_PHY_ADDR 1 344 #define TSEC1_PHYIDX 0 345 #define TSEC1_FLAGS TSEC_GIGABIT 346 347 /* Options are: eTSEC[0-1] */ 348 #define CONFIG_ETHPRIME "eTSEC0" 349 350 /* 351 * Environment 352 */ 353 354 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 355 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 356 357 /* 358 * Miscellaneous configurable options 359 */ 360 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 361 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 362 363 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 364 365 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 366 367 /* 368 * For booting Linux, the board info and command line data 369 * have to be in the first 256 MB of memory, since this is 370 * the maximum mapped by the Linux kernel during initialization. 371 */ 372 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ 373 374 /* 375 * Environment Configuration 376 */ 377 378 #if defined(CONFIG_TSEC_ENET) 379 #define CONFIG_HAS_ETH0 380 #endif 381 382 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 383 384 385 #define CONFIG_HOSTNAME "hrcon" 386 #define CONFIG_ROOTPATH "/opt/nfsroot" 387 #define CONFIG_BOOTFILE "uImage" 388 389 #define CONFIG_EXTRA_ENV_SETTINGS \ 390 "netdev=eth0\0" \ 391 "consoledev=ttyS1\0" \ 392 "u-boot=u-boot.bin\0" \ 393 "kernel_addr=1000000\0" \ 394 "fdt_addr=C00000\0" \ 395 "fdtfile=hrcon.dtb\0" \ 396 "load=tftp ${loadaddr} ${u-boot}\0" \ 397 "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ 398 " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\ 399 " +${filesize};cp.b ${fileaddr} " \ 400 __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ 401 "upd=run load update\0" \ 402 403 #define CONFIG_NFSBOOTCOMMAND \ 404 "setenv bootargs root=/dev/nfs rw " \ 405 "nfsroot=$serverip:$rootpath " \ 406 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 407 "console=$consoledev,$baudrate $othbootargs;" \ 408 "tftp ${kernel_addr} $bootfile;" \ 409 "tftp ${fdt_addr} $fdtfile;" \ 410 "bootm ${kernel_addr} - ${fdt_addr}" 411 412 #define CONFIG_MMCBOOTCOMMAND \ 413 "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ 414 "console=$consoledev,$baudrate $othbootargs;" \ 415 "ext2load mmc 0:2 ${kernel_addr} $bootfile;" \ 416 "ext2load mmc 0:2 ${fdt_addr} $fdtfile;" \ 417 "bootm ${kernel_addr} - ${fdt_addr}" 418 419 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND 420 421 #endif /* __CONFIG_H */ 422