1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2017 Logic PD, Inc. 4 * 5 * Configuration settings for the LogicPD i.MX6 SOM. 6 */ 7 8 #ifndef __IMX6LOGIC_CONFIG_H 9 #define __IMX6LOGIC_CONFIG_H 10 11 #define CONFIG_MXC_UART_BASE UART1_BASE 12 #define CONSOLE_DEV "ttymxc0" 13 14 #ifdef CONFIG_SPL 15 #include "imx6_spl.h" 16 #endif 17 18 #include "mx6_common.h" 19 20 /* Size of malloc() pool */ 21 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) 22 23 /* MMC Configs */ 24 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 25 #define CONFIG_SYS_FSL_USDHC_NUM 2 26 27 28 /* Ethernet Configs */ 29 #define CONFIG_FEC_XCV_TYPE RMII 30 #define CONFIG_ETHPRIME "FEC" 31 #define CONFIG_FEC_MXC_PHYADDR 0 32 33 #define CONFIG_EXTRA_ENV_SETTINGS \ 34 "script=boot.scr\0" \ 35 "image=zImage\0" \ 36 "bootm_size=0x10000000\0" \ 37 "fdt_addr_r=0x14000000\0" \ 38 "ramdisk_addr_r=0x14080000\0" \ 39 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 40 "ramdisk_file=rootfs.cpio.uboot\0" \ 41 "boot_fdt=try\0" \ 42 "ip_dyn=yes\0" \ 43 "console=" CONSOLE_DEV "\0" \ 44 "mmcdev=1\0" \ 45 "mmcpart=1\0" \ 46 "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ 47 "nandroot=ubi0:rootfs rootfstype=ubifs\0" \ 48 "mmcargs=setenv bootargs console=${console},${baudrate}" \ 49 " root=PARTUUID=${uuid} rootwait rw ${mtdparts} ${optargs}\0" \ 50 "nandargs=setenv bootargs console=${console},${baudrate}" \ 51 " ubi.mtd=fs root=${nandroot} ${mtdparts} ${optargs}\0" \ 52 "ramargs=setenv bootargs console=${console},${baudrate}" \ 53 " root=/dev/ram rw ${mtdparts} ${optargs}\0" \ 54 "loadbootscript=" \ 55 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 56 "bootscript=echo Running bootscript from mmc ...;" \ 57 " source\0" \ 58 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};" \ 59 " setenv kernelsize ${filesize}\0" \ 60 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdt_file}\0" \ 61 "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr_r}" \ 62 " ${ramdisk_file}; setenv ramdisksize ${filesize}\0" \ 63 "mmcboot=echo Booting from mmc...; run finduuid; run mmcargs;" \ 64 "run loadimage; run loadfdt; bootz ${loadaddr} - ${fdt_addr_r}\0" \ 65 "mmcramboot=run ramargs; run loadimage;" \ 66 " run loadfdt; run loadramdisk;" \ 67 " bootz ${loadaddr} ${ramdisk_addr_r} ${fdt_addr_r}\0" \ 68 "nandboot=echo Booting from nand ...; " \ 69 " run nandargs;" \ 70 " nand read ${loadaddr} kernel ${kernelsize};" \ 71 " nand read ${fdt_addr_r} dtb;" \ 72 " bootz ${loadaddr} - ${fdt_addr_r}\0" \ 73 "nandramboot=echo Booting RAMdisk from nand ...; " \ 74 " nand read ${ramdisk_addr_r} fs ${ramdisksize};" \ 75 " nand read ${loadaddr} kernel ${kernelsize};" \ 76 " nand read ${fdt_addr_r} dtb;" \ 77 " run ramargs;" \ 78 " bootz ${loadaddr} ${ramdisk_addr_r} ${fdt_addr_r}\0" \ 79 "netargs=setenv bootargs console=${console},${baudrate} " \ 80 "root=/dev/nfs" \ 81 " ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 82 "netboot=echo Booting from net ...; " \ 83 "run netargs; " \ 84 "if test ${ip_dyn} = yes; then " \ 85 "setenv get_cmd dhcp; " \ 86 "else " \ 87 "setenv get_cmd tftp; " \ 88 "fi; " \ 89 "${get_cmd} ${image}; " \ 90 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 91 "if ${get_cmd} ${fdt_addr_r} ${fdt_file}; then " \ 92 "bootz ${loadaddr} - ${fdt_addr_r}; " \ 93 "else " \ 94 "if test ${boot_fdt} = try; then " \ 95 "bootz; " \ 96 "else " \ 97 "echo WARN: Cannot load the DT; " \ 98 "fi; " \ 99 "fi; " \ 100 "else " \ 101 "bootz; " \ 102 "fi;\0" \ 103 "autoboot=mmc dev ${mmcdev};" \ 104 "if mmc rescan; then " \ 105 "if run loadbootscript; then " \ 106 "run bootscript; " \ 107 "else " \ 108 "if run loadimage; then " \ 109 "run mmcboot; " \ 110 "else run netboot; " \ 111 "fi; " \ 112 "fi; " \ 113 "else run netboot; fi" 114 #define CONFIG_BOOTCOMMAND \ 115 "run autoboot" 116 117 #define CONFIG_ARP_TIMEOUT 200UL 118 119 /* Physical Memory Map */ 120 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 121 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 122 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 123 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 124 125 #define CONFIG_SYS_INIT_SP_OFFSET \ 126 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 127 #define CONFIG_SYS_INIT_SP_ADDR \ 128 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 129 130 /* Environment organization */ 131 132 /* NAND stuff */ 133 #define CONFIG_SYS_MAX_NAND_DEVICE 1 134 #define CONFIG_SYS_NAND_BASE 0x40000000 135 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 136 #define CONFIG_SYS_NAND_ONFI_DETECTION 137 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 138 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 139 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00500000 140 141 /* MTD device */ 142 143 /* DMA stuff, needed for GPMI/MXS NAND support */ 144 145 /* EEPROM contains serial no, MAC addr and other Logic PD info */ 146 #define CONFIG_I2C_EEPROM 147 148 /* USB Configs */ 149 #ifdef CONFIG_CMD_USB 150 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 151 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 152 #define CONFIG_MXC_USB_FLAGS 0 153 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */ 154 #endif 155 156 /* Falcon Mode */ 157 #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" 158 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" 159 #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 160 161 /* Falcon Mode - MMC support: args@1MB kernel@2MB */ 162 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ 163 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) 164 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ 165 166 #endif /* __IMX6LOGIC_CONFIG_H */ 167