1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2003 4 * Texas Instruments. 5 * Kshitij Gupta <kshitij@ti.com> 6 * Configuation settings for the TI OMAP Innovator board. 7 * 8 * (C) Copyright 2004 9 * ARM Ltd. 10 * Philippe Robin, <philippe.robin@arm.com> 11 * Configuration for Compact Integrator board. 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 #include "integrator-common.h" 18 19 /* Integrator CP-specific configuration */ 20 #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ 21 22 /* 23 * Hardware drivers 24 */ 25 #define CONFIG_SMC91111 26 #define CONFIG_SMC_USE_32_BIT 27 #define CONFIG_SMC91111_BASE 0xC8000000 28 #undef CONFIG_SMC91111_EXT_PHY 29 30 #define CONFIG_BOOTCOMMAND "tftpboot ; bootm" 31 #define CONFIG_SERVERIP 192.168.1.100 32 #define CONFIG_IPADDR 192.168.1.104 33 #define CONFIG_BOOTFILE "uImage" 34 35 /* 36 * Miscellaneous configurable options 37 */ 38 #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ 39 #define CONFIG_SYS_MAX_FLASH_SECT 64 40 #define CONFIG_SYS_MONITOR_LEN 0x00100000 41 42 /* 43 * Move up the U-Boot & monitor area if more flash is fitted. 44 * If this U-Boot is to be run on Integrators with varying flash sizes, 45 * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG 46 * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE 47 * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not 48 * embedded in the boot monitor(s) area 49 */ 50 #if ( PHYS_FLASH_SIZE == 0x04000000 ) 51 52 #define CONFIG_SYS_MONITOR_BASE 0x27F40000 53 54 #elif (PHYS_FLASH_SIZE == 0x02000000 ) 55 56 #define CONFIG_SYS_MONITOR_BASE 0x25F40000 57 58 #else 59 60 #define CONFIG_SYS_MONITOR_BASE 0x27F40000 61 62 #endif 63 64 #endif /* __CONFIG_H */ 65