1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (c) 2012 Michael Walle 4 * Michael Walle <michael@walle.cc> 5 */ 6 7 #ifndef _CONFIG_LSXL_H 8 #define _CONFIG_LSXL_H 9 10 /* 11 * Version number information 12 */ 13 #if defined(CONFIG_LSCHLV2) 14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 15 #define CONFIG_MACH_TYPE 3006 16 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 17 #elif defined(CONFIG_LSXHL) 18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 19 #define CONFIG_MACH_TYPE 2663 20 /* CONFIG_SYS_TCLK is 200000000 by default */ 21 #else 22 #error "unknown board" 23 #endif 24 25 /* 26 * General configuration options 27 */ 28 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 29 #define CONFIG_KW88F6281 /* SOC Name */ 30 31 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 32 33 #define CONFIG_KIRKWOOD_GPIO 34 35 #include "mv-common.h" 36 37 /* loading initramfs images without uimage header */ 38 39 /* 40 * Environment variables configurations 41 */ 42 #ifdef CONFIG_SPI_FLASH 43 #define CONFIG_SYS_MAX_FLASH_BANKS 1 44 #define CONFIG_SYS_MAX_FLASH_SECT 8 45 #endif 46 47 /* 48 * Default environment variables 49 */ 50 #define CONFIG_LOADADDR 0x00800000 51 52 #if defined(CONFIG_LSXHL) 53 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 54 #elif defined(CONFIG_LSCHLV2) 55 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 56 #else 57 #error "Unsupported board" 58 #endif 59 60 #define CONFIG_EXTRA_ENV_SETTINGS \ 61 "bootsource=legacy\0" \ 62 "hdpart=0:1\0" \ 63 "kernel_addr=0x00800000\0" \ 64 "ramdisk_addr=0x01000000\0" \ 65 "fdt_addr=0x00ff0000\0" \ 66 "bootcmd_legacy=sata init " \ 67 "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\ 68 "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ 69 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ 70 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ 71 "&& tftpboot ${ramdisk_addr} initrd.img " \ 72 "&& setenv ramdisk_len ${filesize} " \ 73 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 74 "&& bootz ${kernel_addr} " \ 75 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 76 "bootcmd_hdd=sata init " \ 77 "&& load sata ${hdpart} ${kernel_addr} /vmlinuz " \ 78 "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img " \ 79 "&& setenv ramdisk_len ${filesize} " \ 80 "&& load sata ${hdpart} ${fdt_addr} /dtb " \ 81 "&& bootz ${kernel_addr} " \ 82 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 83 "bootcmd_usb=usb start " \ 84 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ 85 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ 86 "&& setenv ramdisk_len ${filesize} " \ 87 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ 88 "&& bootz ${kernel_addr} " \ 89 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 90 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 91 "eraseenv=sf probe 0 " \ 92 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 93 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 94 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 95 "setenv autoload no " \ 96 "&& bootp " \ 97 "&& setenv ncip " \ 98 "&& setenv autoload ${autoload_old}; " \ 99 "setenv autoload_old\0" \ 100 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 101 "setenv ncip; setenv gatewayip; setenv ethact; " \ 102 "setenv bootfile; setenv dnsip; " \ 103 "setenv bootsource legacy; run ser\0" \ 104 "restore_env=run standard_env; saveenv; reset\0" \ 105 "ser=setenv stdin serial; setenv stdout serial; " \ 106 "setenv stderr serial\0" \ 107 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 108 "stdin=serial\0" \ 109 "stdout=serial\0" \ 110 "stderr=serial\0" 111 112 /* 113 * Ethernet Driver configuration 114 */ 115 #ifdef CONFIG_CMD_NET 116 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 117 #define CONFIG_PHY_BASE_ADR 7 118 #undef CONFIG_RESET_PHY_R 119 #endif /* CONFIG_CMD_NET */ 120 121 #ifdef CONFIG_SATA 122 #define CONFIG_SYS_SATA_MAX_DEVICE 1 123 #define CONFIG_SYS_64BIT_LBA 124 #define CONFIG_LBA48 125 #endif 126 127 #endif /* _CONFIG_LSXL_H */ 128