1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2018,2020 NXP 4 */ 5 6 #ifndef __LX2_RDB_H 7 #define __LX2_RDB_H 8 9 #include "lx2160a_common.h" 10 11 /* VID */ 12 #define CONFIG_VID_FLS_ENV "lx2160ardb_vdd_mv" 13 #define CONFIG_VID 14 #define CONFIG_VOL_MONITOR_LTC3882_SET 15 #define CONFIG_VOL_MONITOR_LTC3882_READ 16 17 /* RTC */ 18 #define CONFIG_SYS_RTC_BUS_NUM 4 19 20 /* MAC/PHY configuration */ 21 #if defined(CONFIG_FSL_MC_ENET) 22 #define CONFIG_MII 23 #define CONFIG_ETHPRIME "DPMAC1@xgmii" 24 #endif 25 26 /* EMC2305 */ 27 #define I2C_MUX_CH_EMC2305 0x09 28 #define I2C_EMC2305_ADDR 0x4D 29 #define I2C_EMC2305_CMD 0x40 30 #define I2C_EMC2305_PWM 0x80 31 32 /* EEPROM */ 33 #define CONFIG_ID_EEPROM 34 #define CONFIG_SYS_I2C_EEPROM_NXID 35 #define CONFIG_SYS_EEPROM_BUS_NUM 0 36 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 37 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 38 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 39 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 40 41 /* Initial environment variables */ 42 #define CONFIG_EXTRA_ENV_SETTINGS \ 43 EXTRA_ENV_SETTINGS \ 44 "boot_scripts=lx2160ardb_boot.scr\0" \ 45 "boot_script_hdr=hdr_lx2160ardb_bs.out\0" \ 46 "BOARD=lx2160ardb\0" \ 47 "xspi_bootcmd=echo Trying load from flexspi..;" \ 48 "sf probe 0:0 && sf read $load_addr " \ 49 "$kernel_start $kernel_size ; env exists secureboot &&" \ 50 "sf read $kernelheader_addr_r $kernelheader_start " \ 51 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ 52 " bootm $load_addr#$BOARD\0" \ 53 "sd_bootcmd=echo Trying load from sd card..;" \ 54 "mmc dev 0; mmcinfo; mmc read $load_addr " \ 55 "$kernel_addr_sd $kernel_size_sd ;" \ 56 "env exists secureboot && mmc read $kernelheader_addr_r "\ 57 "$kernelhdr_addr_sd $kernelhdr_size_sd " \ 58 " && esbc_validate ${kernelheader_addr_r};" \ 59 "bootm $load_addr#$BOARD\0" \ 60 "sd2_bootcmd=echo Trying load from emmc card..;" \ 61 "mmc dev 1; mmcinfo; mmc read $load_addr " \ 62 "$kernel_addr_sd $kernel_size_sd ;" \ 63 "env exists secureboot && mmc read $kernelheader_addr_r "\ 64 "$kernelhdr_addr_sd $kernelhdr_size_sd " \ 65 " && esbc_validate ${kernelheader_addr_r};" \ 66 "bootm $load_addr#$BOARD\0" 67 68 #include <asm/fsl_secure_boot.h> 69 70 #endif /* __LX2_RDB_H */ 71