1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2020 NXP 4 */ 5 6 #ifndef __LX2162_QDS_H 7 #define __LX2162_QDS_H 8 9 #include "lx2160a_common.h" 10 11 /* USB */ 12 #undef CONFIG_USB_MAX_CONTROLLER_COUNT 13 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 14 15 /* Voltage monitor on channel 2*/ 16 #define CONFIG_VID_FLS_ENV "lx2162aqds_vdd_mv" 17 #define CONFIG_VID 18 #define CONFIG_VOL_MONITOR_LTC3882_SET 19 #define CONFIG_VOL_MONITOR_LTC3882_READ 20 21 /* RTC */ 22 #define CONFIG_SYS_RTC_BUS_NUM 0 23 24 /* 25 * MMC 26 */ 27 #ifdef CONFIG_MMC 28 #ifndef __ASSEMBLY__ 29 u8 qixis_esdhc_detect_quirk(void); 30 #endif 31 #define CONFIG_ESDHC_DETECT_QUIRK qixis_esdhc_detect_quirk() 32 #endif 33 34 /* MAC/PHY configuration */ 35 #if defined(CONFIG_FSL_MC_ENET) 36 #define CONFIG_MII 37 #define CONFIG_ETHPRIME "DPMAC17@rgmii-id" 38 #endif 39 40 /* EEPROM */ 41 #define CONFIG_ID_EEPROM 42 #define CONFIG_SYS_I2C_EEPROM_NXID 43 #define CONFIG_SYS_EEPROM_BUS_NUM 0 44 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 45 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 46 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 47 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 48 49 /* Initial environment variables */ 50 #define CONFIG_EXTRA_ENV_SETTINGS \ 51 EXTRA_ENV_SETTINGS \ 52 "boot_scripts=lx2162aqds_boot.scr\0" \ 53 "boot_script_hdr=hdr_lx2162aqds_bs.out\0" \ 54 "BOARD=lx2162aqds\0" \ 55 "xspi_bootcmd=echo Trying load from flexspi..;" \ 56 "sf probe 0:0 && sf read $load_addr " \ 57 "$kernel_start $kernel_size ; env exists secureboot &&" \ 58 "sf read $kernelheader_addr_r $kernelheader_start " \ 59 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ 60 " bootm $load_addr#$BOARD\0" \ 61 "sd_bootcmd=echo Trying load from sd card..;" \ 62 "mmc dev 0; mmcinfo; mmc read $load_addr " \ 63 "$kernel_addr_sd $kernel_size_sd ;" \ 64 "env exists secureboot && mmc read $kernelheader_addr_r "\ 65 "$kernelhdr_addr_sd $kernelhdr_size_sd " \ 66 " && esbc_validate ${kernelheader_addr_r};" \ 67 "bootm $load_addr#$BOARD\0" \ 68 "emmc_bootcmd=echo Trying load from emmc card..;" \ 69 "mmc dev 1; mmcinfo; mmc read $load_addr " \ 70 "$kernel_addr_sd $kernel_size_sd ;" \ 71 "env exists secureboot && mmc read $kernelheader_addr_r "\ 72 "$kernelhdr_addr_sd $kernelhdr_size_sd " \ 73 " && esbc_validate ${kernelheader_addr_r};" \ 74 "bootm $load_addr#$BOARD\0" 75 76 #include <asm/fsl_secure_boot.h> 77 78 #endif /* __LX2162_QDS_H */ 79