1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2013 4 * Texas Instruments Incorporated. 5 * Sricharan R <r.sricharan@ti.com> 6 * 7 * Configuration settings for the TI EVM5430 board. 8 * See ti_omap5_common.h for omap5 common settings. 9 */ 10 11 #ifndef __CONFIG_OMAP5_EVM_H 12 #define __CONFIG_OMAP5_EVM_H 13 14 #include <environment/ti/dfu.h> 15 16 #ifndef CONFIG_SPL_BUILD 17 /* Define the default GPT table for eMMC */ 18 #define PARTS_DEFAULT \ 19 "uuid_disk=${uuid_gpt_disk};" \ 20 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" 21 #endif 22 23 #define DFUARGS \ 24 "dfu_bufsiz=0x10000\0" \ 25 DFU_ALT_INFO_MMC \ 26 DFU_ALT_INFO_EMMC \ 27 DFU_ALT_INFO_RAM 28 29 #include <configs/ti_omap5_common.h> 30 31 #define CONFIG_SYS_NS16550_COM3 UART3_BASE 32 33 /* MMC ENV related defines */ 34 35 /* Enhance our eMMC support / experience. */ 36 #define CONFIG_HSMMC2_8BIT 37 38 /* Required support for the TCA642X GPIO we have on the uEVM */ 39 #define CONFIG_TCA642X 40 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4 41 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 42 43 /* USB UHH support options */ 44 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 45 46 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 47 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 48 49 /* Enabled commands */ 50 51 /* USB Networking options */ 52 53 #define CONSOLEDEV "ttyS2" 54 55 #define CONFIG_SCSI_AHCI_PLAT 56 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 57 #define CONFIG_SYS_SCSI_MAX_LUN 1 58 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 59 CONFIG_SYS_SCSI_MAX_LUN) 60 61 #endif /* __CONFIG_OMAP5_EVM_H */ 62