1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2009 4 * Net Insight <www.netinsight.net> 5 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> 6 * 7 * Based on sheevaplug.h: 8 * (C) Copyright 2009 9 * Marvell Semiconductor <www.marvell.com> 10 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 11 */ 12 13 #ifndef _CONFIG_OPENRD_H 14 #define _CONFIG_OPENRD_H 15 16 /* 17 * High Level Configuration Options (easy to change) 18 */ 19 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 20 #define CONFIG_KW88F6281 1 /* SOC Name */ 21 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 22 23 #include "mv-common.h" 24 25 /* 26 * Environment variables configurations 27 */ 28 /* 29 * max 4k env size is enough, but in case of nand 30 * it has to be rounded to sector size 31 */ 32 /* 33 * Environment is right behind U-Boot in flash. Make sure U-Boot 34 * doesn't grow into the environment area. 35 */ 36 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET 37 38 /* 39 * Default environment variables 40 */ 41 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 42 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 43 "${x_bootcmd_usb}; bootm 0x6400000;" 44 45 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \ 46 CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ 47 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 48 "x_bootcmd_usb=usb start\0" \ 49 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" 50 51 /* 52 * Ethernet Driver configuration 53 */ 54 #ifdef CONFIG_CMD_NET 55 # ifdef CONFIG_BOARD_IS_OPENRD_BASE 56 # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 57 # else 58 # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 59 # endif 60 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE 61 # define CONFIG_PHY_BASE_ADR 0x0 62 # define PHY_NO "88E1121" 63 # else 64 # define CONFIG_PHY_BASE_ADR 0x8 65 # define PHY_NO "88E1116" 66 # endif 67 #endif /* CONFIG_CMD_NET */ 68 69 /* 70 * SATA Driver configuration 71 */ 72 #ifdef CONFIG_MVSATA_IDE 73 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 74 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 75 #endif /*CONFIG_MVSATA_IDE*/ 76 77 #ifdef CONFIG_CMD_MMC 78 #define CONFIG_MVEBU_MMC 79 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 80 #endif /* CONFIG_CMD_MMC */ 81 82 #endif /* _CONFIG_OPENRD_BASE_H */ 83