1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2012 4 * David Purdy <david.c.purdy@gmail.com> 5 * 6 * Based on Kirkwood support: 7 * (C) Copyright 2009 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 */ 11 12 #ifndef _CONFIG_POGO_E02_H 13 #define _CONFIG_POGO_E02_H 14 15 /* 16 * Machine type definition and ID 17 */ 18 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 24 #define CONFIG_KW88F6281 /* SOC Name */ 25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 26 27 #include "mv-common.h" 28 29 /* 30 * Environment variables configurations 31 */ 32 33 /* 34 * Default environment variables 35 */ 36 #define CONFIG_BOOTCOMMAND \ 37 "setenv bootargs $(bootargs_console); " \ 38 "run bootcmd_usb; " \ 39 "bootm 0x00800000 0x01100000" 40 41 #define CONFIG_EXTRA_ENV_SETTINGS \ 42 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ 43 "32M(rootfs),-(data)\0"\ 44 "mtdids=nand0=orion_nand\0"\ 45 "bootargs_console=console=ttyS0,115200\0" \ 46 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 47 "ext2load usb 0:1 0x01100000 /uInitrd\0" 48 49 /* 50 * Ethernet Driver configuration 51 */ 52 #ifdef CONFIG_CMD_NET 53 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 54 #define CONFIG_PHY_BASE_ADR 0 55 #endif /* CONFIG_CMD_NET */ 56 57 /* 58 * File system 59 */ 60 61 #endif /* _CONFIG_POGO_E02_H */ 62