1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2013 4 * NVIDIA Corporation <www.nvidia.com> 5 */ 6 7 #ifndef _TEGRA124_COMMON_H_ 8 #define _TEGRA124_COMMON_H_ 9 10 #include "tegra-common.h" 11 12 /* 13 * NS16550 Configuration 14 */ 15 #define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ 16 17 /* 18 * Miscellaneous configurable options 19 */ 20 #define CONFIG_STACKBASE 0x83800000 /* 56MB */ 21 22 /*----------------------------------------------------------------------- 23 * Physical Memory Map 24 */ 25 26 /* 27 * Memory layout for where various images get loaded by boot scripts: 28 * 29 * scriptaddr can be pretty much anywhere that doesn't conflict with something 30 * else. Put it above BOOTMAPSZ to eliminate conflicts. 31 * 32 * pxefile_addr_r can be pretty much anywhere that doesn't conflict with 33 * something else. Put it above BOOTMAPSZ to eliminate conflicts. 34 * 35 * kernel_addr_r must be within the first 128M of RAM in order for the 36 * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will 37 * decompress itself to 0x8000 after the start of RAM, kernel_addr_r 38 * should not overlap that area, or the kernel will have to copy itself 39 * somewhere else before decompression. Similarly, the address of any other 40 * data passed to the kernel shouldn't overlap the start of RAM. Pushing 41 * this up to 32M allows for a sizable kernel to be decompressed below the 42 * compressed load address. 43 * 44 * fdt_addr_r simply shouldn't overlap anything else. Choosing 48M allows for 45 * the compressed kernel to be up to 32M too. 46 * 47 * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows 48 * for the FDT/DTB to be up to 1M, which is hopefully plenty. 49 */ 50 #define CONFIG_LOADADDR 0x81000000 51 #define MEM_LAYOUT_ENV_SETTINGS \ 52 "scriptaddr=0x90000000\0" \ 53 "pxefile_addr_r=0x90100000\0" \ 54 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 55 "fdtfile=" FDTFILE "\0" \ 56 "fdt_addr_r=0x83000000\0" \ 57 "ramdisk_addr_r=0x83100000\0" 58 59 /* Defines for SPL */ 60 #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 61 #define CONFIG_SPL_STACK 0x800ffffc 62 63 /* For USB EHCI controller */ 64 #define CONFIG_EHCI_IS_TDI 65 #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 66 67 /* GPU needs setup */ 68 #define CONFIG_TEGRA_GPU 69 70 #endif /* _TEGRA124_COMMON_H_ */ 71