1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2016 samtec automotive software & electronics gmbh 4 * 5 * Configuration settings for the Samtec VIN|ING 2000 board. 6 */ 7 8 #ifndef __CONFIG_H 9 #define __CONFIG_H 10 11 #include "mx6_common.h" 12 13 #ifdef CONFIG_SPL 14 #include "imx6_spl.h" 15 #endif 16 17 /* Size of malloc() pool */ 18 #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) 19 20 #define BOOT_TARGET_DEVICES(func) \ 21 func(MMC, mmc, 0) \ 22 func(MMC, mmc, 1) \ 23 func(USB, usb, 0) \ 24 func(PXE, pxe, na) \ 25 func(DHCP, dhcp, na) 26 #include <config_distro_bootcmd.h> 27 28 /* Miscellaneous configurable options */ 29 30 /* Physical Memory Map */ 31 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 32 33 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 34 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 35 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 36 37 #define CONFIG_SYS_INIT_SP_OFFSET \ 38 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 39 #define CONFIG_SYS_INIT_SP_ADDR \ 40 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 41 42 /* MMC Configuration */ 43 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR 44 45 /* I2C Configs */ 46 #define CONFIG_SYS_I2C 47 #define CONFIG_SYS_I2C_MXC 48 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 49 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 50 #define CONFIG_SYS_I2C_SPEED 100000 51 52 /* PMIC */ 53 #define CONFIG_POWER 54 #define CONFIG_POWER_I2C 55 #define CONFIG_POWER_PFUZE100 56 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 57 58 /* Network */ 59 #define IMX_FEC_BASE ENET_BASE_ADDR 60 #define CONFIG_FEC_MXC_PHYADDR 0x0 61 62 #define CONFIG_FEC_XCV_TYPE RMII 63 #define CONFIG_ETHPRIME "FEC" 64 65 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 66 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 67 #define CONFIG_MXC_USB_FLAGS 0 68 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 69 70 #ifdef CONFIG_CMD_PCI 71 #define CONFIG_PCI_SCAN_SHOW 72 #define CONFIG_PCIE_IMX 73 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(4, 6) 74 #endif 75 76 #define CONFIG_IMX6_PWM_PER_CLK 66000000 77 78 #ifdef CONFIG_ENV_IS_IN_MMC 79 /* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */ 80 #endif 81 82 #ifdef CONFIG_SPL_BUILD 83 #define CONFIG_MXC_UART_BASE UART1_BASE 84 #endif 85 86 #endif /* __CONFIG_H */ 87