1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Configuration for Xilinx Versal 4 * (C) Copyright 2016 - 2018 Xilinx, Inc. 5 * Michal Simek <michal.simek@xilinx.com> 6 * 7 * Based on Configuration for Xilinx ZynqMP 8 */ 9 10 #ifndef __XILINX_VERSAL_H 11 #define __XILINX_VERSAL_H 12 13 #define CONFIG_REMAKE_ELF 14 15 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */ 16 17 /* Generic Interrupt Controller Definitions */ 18 #define GICD_BASE 0xF9000000 19 #define GICR_BASE 0xF9080000 20 21 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE 22 23 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ 24 #if CONFIG_COUNTER_FREQUENCY 25 # define COUNTER_FREQUENCY CONFIG_COUNTER_FREQUENCY 26 #endif 27 28 /* Serial setup */ 29 #define CONFIG_CPU_ARMV8 30 31 #define CONFIG_SYS_BAUDRATE_TABLE \ 32 { 4800, 9600, 19200, 38400, 57600, 115200 } 33 34 /* BOOTP options */ 35 #define CONFIG_BOOTP_BOOTFILESIZE 36 #define CONFIG_BOOTP_MAY_FAIL 37 38 /* Miscellaneous configurable options */ 39 #define CONFIG_SYS_LOAD_ADDR 0x8000000 40 41 /* Monitor Command Prompt */ 42 /* Console I/O Buffer Size */ 43 #define CONFIG_SYS_CBSIZE 2048 44 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 45 sizeof(CONFIG_SYS_PROMPT) + 16) 46 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 47 #define CONFIG_SYS_MAXARGS 64 48 49 #if defined(CONFIG_CMD_DFU) 50 #define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 51 #define DFU_DEFAULT_POLL_TIMEOUT 300 52 #define CONFIG_THOR_RESET_OFF 53 #define DFU_ALT_INFO_RAM \ 54 "dfu_ram_info=" \ 55 "setenv dfu_alt_info " \ 56 "Image ram 80000 $kernel_size_r\\\\;" \ 57 "system.dtb ram $fdt_addr_r $fdt_size_r\0" \ 58 "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ 59 "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" 60 61 #define DFU_ALT_INFO \ 62 DFU_ALT_INFO_RAM 63 #endif 64 65 #if !defined(DFU_ALT_INFO) 66 # define DFU_ALT_INFO 67 #endif 68 69 /* Ethernet driver */ 70 #if defined(CONFIG_ZYNQ_GEM) 71 # define CONFIG_NET_MULTI 72 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 73 # define PHY_ANEG_TIMEOUT 20000 74 #endif 75 76 #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) 77 78 #define CONFIG_CLOCKS 79 80 #define ENV_MEM_LAYOUT_SETTINGS \ 81 "fdt_addr_r=0x40000000\0" \ 82 "fdt_size_r=0x400000\0" \ 83 "pxefile_addr_r=0x10000000\0" \ 84 "kernel_addr_r=0x18000000\0" \ 85 "kernel_size_r=0x10000000\0" \ 86 "scriptaddr=0x20000000\0" \ 87 "ramdisk_addr_r=0x02100000\0" \ 88 "script_size_f=0x80000\0" 89 90 #if defined(CONFIG_MMC_SDHCI_ZYNQ) 91 # define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) 92 #else 93 # define BOOT_TARGET_DEVICES_MMC(func) 94 #endif 95 96 #if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP) 97 # define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) 98 #else 99 # define BOOT_TARGET_DEVICES_PXE(func) 100 #endif 101 102 #if defined(CONFIG_CMD_DHCP) 103 # define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na) 104 #else 105 # define BOOT_TARGET_DEVICES_DHCP(func) 106 #endif 107 108 #if defined(CONFIG_ZYNQMP_GQSPI) || defined(CONFIG_CADENCE_OSPI_VERSAL) 109 # define BOOT_TARGET_DEVICES_XSPI(func) func(XSPI, xspi, 0) 110 #else 111 # define BOOT_TARGET_DEVICES_XSPI(func) 112 #endif 113 114 #define BOOTENV_DEV_XSPI(devtypeu, devtypel, instance) \ 115 "bootcmd_xspi0=sf probe 0 0 0 && " \ 116 "sf read $scriptaddr $script_offset_f $script_size_f && " \ 117 "echo XSPI: Trying to boot script at ${scriptaddr} && " \ 118 "source ${scriptaddr}; echo XSPI: SCRIPT FAILED: continuing...;\0" 119 120 #define BOOTENV_DEV_NAME_XSPI(devtypeu, devtypel, instance) \ 121 "xspi0 " 122 123 #define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na) 124 125 #define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \ 126 "bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \ 127 "source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0" 128 129 #define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \ 130 "jtag " 131 132 #define BOOT_TARGET_DEVICES_DFU_USB(func) func(DFU_USB, dfu_usb, 0) 133 134 #define BOOTENV_DEV_DFU_USB(devtypeu, devtypel, instance) \ 135 "bootcmd_dfu_usb=setenv dfu_alt_info boot.scr ram $scriptaddr " \ 136 "$script_size_f; dfu 0 ram 0 && " \ 137 "echo DFU: Trying to boot script at ${scriptaddr} && " \ 138 "source ${scriptaddr}; " \ 139 "echo DFU: SCRIPT FAILED: continuing...;\0" 140 141 #define BOOTENV_DEV_NAME_DFU_USB(devtypeu, devtypel, instance) \ 142 "dfu_usb " 143 144 #define BOOT_TARGET_DEVICES(func) \ 145 BOOT_TARGET_DEVICES_JTAG(func) \ 146 BOOT_TARGET_DEVICES_MMC(func) \ 147 BOOT_TARGET_DEVICES_XSPI(func) \ 148 BOOT_TARGET_DEVICES_DFU_USB(func) \ 149 BOOT_TARGET_DEVICES_PXE(func) \ 150 BOOT_TARGET_DEVICES_DHCP(func) 151 152 #include <config_distro_bootcmd.h> 153 154 /* Initial environment variables */ 155 #ifndef CONFIG_EXTRA_ENV_SETTINGS 156 #define CONFIG_EXTRA_ENV_SETTINGS \ 157 ENV_MEM_LAYOUT_SETTINGS \ 158 BOOTENV \ 159 DFU_ALT_INFO 160 #endif 161 162 #endif /* __XILINX_VERSAL_H */ 163