1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> 4 * 5 * Configuration settings for the CCV xPress board 6 */ 7 #ifndef __XPRESS_CONFIG_H 8 #define __XPRESS_CONFIG_H 9 10 #include "mx6_common.h" 11 #include <asm/mach-imx/gpio.h> 12 13 /* SPL options */ 14 #include "imx6_spl.h" 15 16 /* Size of malloc() pool */ 17 #define CONFIG_SYS_MALLOC_LEN (16 << 20) 18 19 #define CONFIG_MXC_UART_BASE MX6UL_UART7_BASE_ADDR 20 21 /* MMC Configs */ 22 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 23 24 /* I2C configs */ 25 #define CONFIG_SYS_I2C 26 #define CONFIG_SYS_I2C_MXC 27 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 28 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 29 #define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ 30 #define CONFIG_SYS_I2C_SPEED 100000 31 32 /* Miscellaneous configurable options */ 33 34 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 35 #define CONFIG_SYS_HZ 1000 36 37 /* Physical Memory Map */ 38 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 39 #define PHYS_SDRAM_SIZE (128 << 20) 40 41 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 42 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 43 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 44 45 #define CONFIG_SYS_INIT_SP_OFFSET \ 46 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 47 #define CONFIG_SYS_INIT_SP_ADDR \ 48 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 49 50 /* Environment is in stored in the eMMC boot partition */ 51 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC2 */ 52 53 /* USB Configs */ 54 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 55 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 56 #define CONFIG_MXC_USB_FLAGS 0 57 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 58 59 #define CONFIG_FEC_MXC 60 #define CONFIG_FEC_ENET_DEV 0 61 #define IMX_FEC_BASE ENET_BASE_ADDR 62 #define CONFIG_FEC_MXC_PHYADDR 0x0 63 #define CONFIG_FEC_XCV_TYPE RMII 64 #define CONFIG_ETHPRIME "FEC" 65 66 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 67 68 #define CONFIG_UBOOT_SECTOR_START 0x2 69 #define CONFIG_UBOOT_SECTOR_COUNT 0x3fe 70 71 #define CONFIG_EXTRA_ENV_SETTINGS \ 72 "script=boot.scr\0" \ 73 "image=zImage\0" \ 74 "console=ttymxc6\0" \ 75 "fdt_high=0xffffffff\0" \ 76 "initrd_high=0xffffffff\0" \ 77 "fdt_file=undefined\0" \ 78 "fdt_addr=0x83000000\0" \ 79 "boot_fdt=try\0" \ 80 "ip_dyn=yes\0" \ 81 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ 82 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ 83 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 84 "mmcautodetect=yes\0" \ 85 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 86 "root=${mmcroot}\0" \ 87 "loadbootscript=" \ 88 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 89 "bootscript=echo Running bootscript from mmc ...; " \ 90 "source\0" \ 91 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 92 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 93 "mmcboot=echo Booting from mmc ...; " \ 94 "run mmcargs; " \ 95 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 96 "if run loadfdt; then " \ 97 "bootz ${loadaddr} - ${fdt_addr}; " \ 98 "else " \ 99 "if test ${boot_fdt} = try; then " \ 100 "bootz; " \ 101 "else " \ 102 "echo WARN: Cannot load the DT; " \ 103 "fi; " \ 104 "fi; " \ 105 "else " \ 106 "bootz; " \ 107 "fi;\0" \ 108 "uboot=ccv/u-boot.imx\0" \ 109 "uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0" \ 110 "uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0" \ 111 "update_uboot=if tftp ${uboot}; then " \ 112 "if itest ${filesize} > 0; then " \ 113 "mmc dev 0 1;" \ 114 "setexpr blkc ${filesize} / 0x200;" \ 115 "setexpr blkc ${blkc} + 1;" \ 116 "if itest ${blkc} <= ${uboot_size}; then " \ 117 "mmc write ${loadaddr} ${uboot_start} " \ 118 "${blkc};" \ 119 "fi;" \ 120 "fi; fi;" \ 121 "setenv filesize; setenv blkc\0" \ 122 "update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0" 123 124 #endif /* __XPRESS_CONFIG_H */ 125