BFloat16 floating-point multiply-add long to single-precision (top)
This BFloat16 floating-point multiply-add long instruction widens the odd-numbered 16-bit BFloat16 elements in the first source vector and the corresponding elements in the second source vector to single-precision format and then destructively multiplies and adds these values without intermediate rounding to the overlapping 32-bit single-precision elements of the addend and destination vector. This instruction is unpredicated.
Unlike the BFloat16 matrix multiplication and dot product instructions, this instruction performs a fused multiply-add that honors all of the FPCR bits that apply to single-precision arithmetic. It can also generate a floating-point exception that causes cumulative exception bits in the FPSR to be set, or a synchronous exception to be taken, depending on the enable bits in the FPCR.
ID_AA64ZFR0_EL1.BF16 indicates whether this instruction is implemented.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 1 | 1 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | Zm | 1 | 0 | 0 | 0 | 0 | 1 | Zn | Zda | ||||||||||||
| o2 | op | T | |||||||||||||||||||||||||||||
if (!HaveSVE() && !HaveSME()) || !HaveBF16Ext() then UNDEFINED; integer n = UInt(Zn); integer m = UInt(Zm); integer da = UInt(Zda);
| <Zda> |
Is the name of the third source and destination scalable vector register, encoded in the "Zda" field. |
| <Zn> |
Is the name of the first source scalable vector register, encoded in the "Zn" field. |
| <Zm> |
Is the name of the second source scalable vector register, encoded in the "Zm" field. |
CheckSVEEnabled(); integer elements = VL DIV 32; bits(VL) operand1 = Z[n]; bits(VL) operand2 = Z[m]; bits(VL) operand3 = Z[da]; bits(VL) result; for e = 0 to elements-1 bits(32) element1 = Elem[operand1, 2 * e + 1, 16] : Zeros(16); bits(32) element2 = Elem[operand2, 2 * e + 1, 16] : Zeros(16); bits(32) element3 = Elem[operand3, e, 32]; Elem[result, e, 32] = BFMulAdd(element3, element1, element2, FPCR[]); Z[da] = result;
This instruction might be immediately preceded in program order by a MOVPRFX instruction. The MOVPRFX instruction must conform to all of the following requirements, otherwise the behavior of the MOVPRFX and this instruction is unpredictable:
Internal version only: isa v33.11seprel, AdvSIMD v29.05, pseudocode v2021-09_rel, sve v2021-09_rc3d ; Build timestamp: 2021-10-06T11:41
Copyright © 2010-2021 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.